We used to use this to determine what color to show by default on the
item page preview for, like, Maraquan-specific items. Now, we infer it
from our actual customization data, rather than these heuristics!
There's still a database field for `Item#manual_special_color_id`. We
can still read and write this from the support UI, and Impress 2020
still slightly uses it from the homepage, so I'm not removing from the
database right now.
The `build_on_pet_types` helper used to be reused on the items page, to
generate the list of species to display. We don't use it anymore, so
simplify and remove!
I'm about to reimplement the more-robust version of what this used to
be: how the item page used to say "sometimes" after certain zones in
the occupied list.
Now, we're going to do parity with 2020, and list the actual species!
I like that this takes away the weird `#sometimes` method on the `Zone`
class, which was always an odd hack for just this small thing.
We had this issue on Impress 2020 and I fixed it over there too. I guess
it went less noticed here on Classic, because it's a more
progressively-enhanced site in general (and this failure case is an
interesting argument for that architecture! lol).
On Impress 2020, I wasn't sure if the "waits for the document to load"
behavior of the `defer` attribute was necessary to the script, so I
chose to keep `defer` but move it _after_ the other scripts.
This time, I dug in a bit more, and found a Plausible author saying
that the choice was kinda arbitrary; and another person who had the
same issue as me, who said they switched to `async` and it worked well.
So, that's what we're doing now, too!
https://github.com/plausible/analytics/discussions/1907#discussioncomment-2754499
Closes#2, after making some tweaks to the PR to fit how JS templating
works here. Thanks @dice!!
I had to move `petThumbnailUrl` out of the closure, because this script
does a cute thing of having separate variable scopes for the separate
areas of the page—but this is used by two of them. Arguably it could
make sense to like, put this all in one larger shared IIFE closure that
wraps both of them, to preserve some of this code's intention of
avoiding adding to the global namespace on this page, but like.
*It's fine.*
Co-Authored-By: Steve C <diceroll123@gmail.com>
We were previously planning a more interesting "Add to Cart"
integration with TNT, but it hasn't panned out! For now, we'll just
link to the NC Mall homepage.
Two reasons for this new title:
1. The pitch for "Get these items!" is weaker, now that we're not
getting the power-user integrations we'd planned around.
2. I literally only just thought of it now!
Oh right, if the *label* is `:active`, that only applies if we're
clicking it with our mouse. But if the *toggle* is actively, that
applies both to mouse events on the label, and keyboard events on the
checkbox.
Specifically, if a movie layer was the top layer, the `cursor: wait` on
the preview wouldn't show, because the iframe's *contents* would take
priority, and they were using the default cursor.
I thiiiink I've seen the status of a movie `<outfit-layer>` sometimes
be `loading` even when it's clearly already loaded and running. I
haven't been able to track down where and how that happens exactly, so
this is me acting on a hunch: that maybe the
I-would-have-thought-very-unlikely event that the iframe finishes
loading before the `<outfit-layer>` connects with its children maybe
happens more often than one might think!
In this change, we set up the iframe to receive `requestStatus`
messages, which it responds to with the status immediately. And we send
one of these when the `<outfit-layer>` first discovers the iframe.
Fingers crossed!
This doesn't do a good job maintaining state across morphs, but hey
it's Working At All in terms of wiring, and that's good!!
Also need to style up the toggle as a cute button instead of a visible
checkbox and the words "Play/pause"!
This is a nice extra error handler to have, but note that it *won't*
catch the case where the iframe successfully loads but the page returns
a bad status code. In this case, we'll just show the loading state
forever.
Add some unobtrusive white background for contrast, show it when the
Turbo frame is loading too, add a spinner cursor, and fix a silliness
of how we put the `position: absolute` stuff into the component-y part
of the hanger spinner instead of this specific use case lol oops!
Oh oops, this is the first script on the page with the `defer`
attribute, which means it needs to run before other scripts with
`defer`—and in this moment, it's not loading for me, which means the
pages aren't working!
I assume Plausible told me to use `defer` rather than `async` because
it expects the page to be ready; okay! Let's just move this to the
very body of the `<head>` instead, so it isn't taking priority over
anything else.
This doesn't actually really matter, because this doesn't actually get
used in the app right now? But I figure, hey it's not hard to maintain,
let's just do it for consistency!
Oh, I didn't realize the `_elem` variant of these parts of the
`Content-Security-Policy` is newer, and so doesn't even work on my
current version of Safari on my Mac.
My rationale at the time was: `script_src_elem` is stricter against
things like imports, and I figured, ok let's do the strictest policy
that works. But since it's not fully compatible with browsers even
*I'm* using right now, and I'm not aware of an actual problem it would
prevent, let's back off that a bit! This should have the same effective
security properties for our case.
Note that the effect of this compatibility issue wasn't *weakening* the
policy; it was being *too* strict, by blocking the scripts and the
stylesheets. This is because `script_src_elem` was ignored, and
`script_src` was absent, so it fell back to `default_src none`.
The most notable thing here is that we keep the movie iframes running!
So if you're trying different pets for an animated item, the animation
keeps going while the new pet layers load alongside it.
This is also nice for like, the species/color picker form, so we're not
taking away input elements from people who depend on e.g. keyboard
focus.
Not using this on the item page preview yet, but we will!
I like this approach over e.g. a web component specifically for the
sandboxing: while I don't exactly *distrust* JS that we're loading from
Neopets.com, I don't like the idea of *any* part of the site that
executes arbitrary JS unsafely at runtime, even if we theoretically
trust where it theoretically came from. I don't want any failure
upstream to have effects on us!
I copied basically all of the JS from a related project
`impress-media-server` that I had spun up at one point, to investigate
similar embed techniques. Easy peasy drop-in-squeezy!
Oh right okay, attributes like `status="loading"` are more of an API
for the caller, whereas the internal state API is where you wanna put
things that are meant to be used in CSS selectors and stuff.
Instead of doing all this listening to Turbo events etc to know when
outfit layers might have changed, making it a custom element and wiring
in the behavior to its actual lifecycle makes it always Just Work!
The UI for it is just basic for my own testing rn: it sets the preview
background to gray while loading, then back to white when done!
This uses the new CSS `:has()` selector: we have JS manage the loading
state on each layer, then the container just restyles itself based on
whether any currently-loading layers are present.
Also adapted from the Impress 2020 logic!
Note that I refactored `compatible_pet_type` to a series of scopes on
`PetType`. I think this is a simpler, clearer, and more flexible API!
This is a cute thing that I think sets us up for other stuff down the
line: move more of the outfit appearance logic into the `Outfit` class!
Now, we set up the item page with a temporary instance of `Outfit`,
then ask for its `visible_layers`.
Still missing restricted-zones logic and such, that's next!
Nice, gotta say, this is a pretty neat way of making things feel more
app-y! There's some missing pieces here about like, loading state etc,
but the vibes are pretty good, and the implementation was dead-easy!
Just stripping out the big React component, and having Rails output it!
There's a lot of work rn in extracting the Impress 2020 dependency from
the `wardrobe-2020` React app, and I'm just curious to see if we can
simplify it at all by pulling this stuff *way* back to basics, and
deleting the item page part of `wardrobe-2020` altogether.
In this draft, we regress a lot of functionality: it just shows the
item on a Blue Acara, with no ability to change it! I'm gonna play with
putting more of that back in.
I also haven't actually removed any of the item page React code; I just
stopped calling it. That can be a cleanup for another time, once we're
confident in this experiment!
Oh huh, TIL in Ruby `^` *always* means "start of line", whereas in many
languages' regular expression engines it means "start of string" unless
you enable a special multiline flag for the pattern.
I've fixed this in a number of expressions now!
I'm noticing this in the context of doing some security training work
where this the cause of a sample vulnerability, but, looking at our own
case, I don't think there was anything *abusable* here? But this is
just more correct, so let's be more correct!
I think the parens are silly now that this paragraph is just kinda all
bonus clarification info anyway. And I wanted to explain the cost
computation for the potions, and highlight the bundle thing!
If the item names are long, it helps to give them more room to breathe!
Whereas if they're short, it looks silly and makes it harder to scan
the table.
Just an extra bit of help for e.g. Dyeworks items with long names!
Huh, I thought I'd tried some invalid dates and they gave me
*surprising* output instead of raising an error. Well, maybe it can do
both, depending on exactly the nature of the unexpected input?
In any case, I found that a bad month name like "UwU" raised an error.
So, let's catch it if so!
Oh right, if I assume "date in the past means it's for next year", then
that means that, when the date *does pass*, we won't realize it!
e.g. if Owls says "Dyeable Thru July 15", then on July 14 we'll parse
that as July 15, 2024; but on July 16 we'll parse it as July 16, 2025,
and so we'll think it's *still* dyeable. Under this logic, it's
actually impossible for a limited Dyeworks date to *ever* be in the
past, I think!
I think 3 months is a good compromise: it gives Owls plenty of time to
update, but allows for events that could last as long as 9 months into
the future, if I'm doing my math right.
The table layout algo can get a bit funky about how it assigns extra
space, I want to encourage things like "Total: 5 items" etc not to
wrap, esp in the Dyeworks case where it's quite long!
There's more and more going on in here! Let's omit the base item name,
increase the table width a bit in this case, and tweak the rest a bit
while we're here.
I uhhh literally didn't know Dyeworks was a gacha system until Kaye
from the Owls team told me lmao
I should maybe uhh read more guides instead of assuming I've osmosed
things correctly oops!
Ahh, I started a tabs-y file (as I default to these days), but copied
code from a spaces-y file, and didn't notice. (My laptop editor isn't
configured to flag this for me, oops!)
Fixed!
There's just starting to be a lot going on, so I pulled them out into
here!
I also considered a like, `Item::DyeworksStatus` class, and then you'd
go like, `item.dyeworks.buyable?`. But idk, I think it's nice that the
current API is simple for callers, and being able to do things like
`items.filter(&:dyeworks_buyable?)` is pretty darn convenient.
This solution lets us keep the increasing number of Dyeworks methods
from polluting the main `item.rb`, while still keeping the API
identical!
Silly mistake, right, we might not have a trade value listed! This is
relevant for the new Dyeworks items that just came out like a few hours
ago, which Owls doesn't have info for yet.
Lmao I've been testing with an outfit that has all the kinds of items,
so I didn't notice that this new refactor to `@items[:dyeworks]` style
of tracking the items returns `nil` when there's none, instead of `[]`.
(I always make this mistake when I use `group_by` lmao sob)
In this change, we give the `@items` hash a default value, so that will
stop happening!
Oh right, this previously logic was silly: we can't count on the
*interval itself* to be reliably resetting the FPS counter state,
because the interval might not be firing!
I think this fix worked when I tried brief tests, but didn't work when
I did an (accidental) longer test, because the browser switched to a
more aggressive throttle mode, and the previous mode was close enough
on the resets for it to be fine, whereas this time the FPS counter
state got way too old.
Now, we reset the FPS counter state *exactly* when the page comes back.
We have a feature to check the movie's FPS, and pause it if it gets too
low, as a guard against especially low-performance movies. But this was
triggering in an *expected* case, where browsers intentionally throttle
interval events when a page is in the background (e.g. you switch to
another tab).
Now, our rendering is aware of page visibility: when the page is
hidden, don't bother rendering, and keep resetting the FPS counter
state, so that we can pick up with a fresh FPS counter when the page
comes back.
Oh weird, even with `flush: true`, `content_for` will ignore an empty
block and *not* flush out the previous content. This could cause rows
whose subtitles *should* have been empty (e.g. no NC trade value) to
display the previous row's value instead.
Let's make this whole situation a bit more robust by having the
*template* clear out the subtitle right before calling the block. That
way, a previous row's value *can't* get in, no matter what.
I think it helps a bit to have only the label be dotted-underlined, to
hint that I'm offering help about what that *means*, but clear the way
for the value itself to be more visible and less cluttered.
I thought to myself, "I wonder if it's possible to use a sneaky hacky
`content_for` trick to be able to run this code in the template." And
indeed it is!
It's tricky cuz like, I want to render this template, and I want to
provide _multiple_ slots of content to it. So, in this variant, we keep
the block as being primarily for the actions, but also optionally
accept `content_for :subtitle` inside that block, too.
Executing that correctly is a bit tricky! The subtitle comes *before*
the actions. So, we `yield` the actions block immediately, save it to a
variable, and *then* get the subtitle block.
Previously, I added a Dyeworks section that was incorrect: the base
item being available in the NC Mall does *not* mean you can necessarily
dye it with a potion!
In this change, we lean on Owls to tell us more about Dyeworks status,
and only group items in this section that Owls has marked as "Permanent
Dyeworks".
We don't have support for limited-time Dyeworks items yet—I've sent out
a message asking the Owls team for more info on what they do for those
items!
I started writing this up, then sent a preview to a friend, and he was
like "oh cool, but also this is not correct?"
I didn't realize Dyeworks has limited-time support to be *able* to dye
certain items. Hey, glad we're writing this guide for people like me,
then! lol
I wonder if we can lean on Owls for this. It seems like they already
list "Permanent Dyeworks" for some items, I wonder if they say
something special for active limited-edition Dyeworks items!
In this change, instead of *always* inferring the Dyeworks base item
from the item name at runtime, we now have a database field that tracks
it, and auto-populates whenever an item *seems* to need a Dyeworks base
item but doesn't have one yet.
This will enable us to set the base item manually in cases where it
can't be inferred, and load Dyeworks base items for the Item Getting
Guide in one query with `includes(:dyeworks_base_item)`.
This migration does a bit more of the fix-em-up scripting work *in* the
migration itself than I usually do, mainly because there's so much in
this one that I think being extra-explicit is useful. We make sure to
do it gracefully though!
This works for most of the current 1,094 Dyeworks items! But there are
a few exceptions, for cases where the base item name is not quite the
same (e.g. the Dyeworks version is more concise). Maybe we'll add a
database field to override this?
- Dyeworks Baby Blue: Baby Valentine Jumper
- Dyeworks Baby Pink: Baby Valentine Jumper
- Dyeworks Black: Field of Flowers
- Dyeworks Black: Games Master Challenge 2010 Lulu Shirt
- Dyeworks Blue: Field of Flowers
- Dyeworks Blue: Stars and Glitter Facepaint
- Dyeworks Brown: Hanging Winter Candles Garland
- Dyeworks Green: Stars and Glitter Facepaint
- Dyeworks Magenta: Lovely Berry Blush
- Dyeworks Orange & Pink: Winter Lights Effects
- Dyeworks Orange: Games Master Challenge 2010 Lulu Shirt
- Dyeworks Peach: Lovely Berry Blush
- Dyeworks Purple: Baby Valentine Jumper
- Dyeworks Purple: Games Master Challenge 2010 Lulu Shirt
- Dyeworks Purple: Hanging Winter Candles Garland
- Dyeworks Purple: Stars and Glitter Facepaint
- Dyeworks Red & Green: Winter Lights Effects
- Dyeworks Silver: Hanging Winter Candles Garland
- Dyeworks Soft Pink: Lovely Berry Blush
- Dyeworks Yellow & Magenta: Winter Lights Effects
- Dyeworks Yellow: Field of Flowers
We could do a whole thing about like, checking singular vs plural, but
I'd rather just keep it simpler; I think it's clear from context that
we're talking about a category, so plural is fine even if it's not
actually more than one.
Okay so, like 30 minutes ago I added fallback behavior for cases where
we can't correctly infer the color from a PB item's name… and then I
pulled it up in the color and found that, oh, right, there are already
3 PB items that *correctly* return `nil` for `Item#pb_color`: Aisha
Collar, Elephante Hat, and Ixi Collar.
This is because they're common items that apply to many colors, like
the basics, but also many other less-special or older color variants.
They are the most likely case where we'll return `nil`.
So, I've updated our fallback UI to, instead of talk vaguely about
missing data, just assume that we're dealing with basic items. In the
rare window of time where a new color is released, and we have PB items
for it but no manual color data yet, this can just incorrectly say
"Basic Colors" and that's fine.
This is less likely than the newly-released color case for PB items,
but I figure let's be resilient anyway, especially since it's so easy
to—and also I figure this is less likely to be triggered by an *actual*
new species, and more likely to be triggered by a surprise in an item's
naming conventions.
But yeah, if `Item#pb_species` returns `nil` upstream, it'll be passed
to `Color#example_pet_type`, which will crash trying to read its ID. So
in this change, we update `Color#example_pet_type` to accept a `nil`
value, and fall back to the first Species (Acara) in that case.
This means that, if you e.g. take the Mutant Aisha Collar and delete
the word "Aisha" from the name, then load it in the Item Getting Guide,
you'll see a thumbnail of a Mutant Acara. Good enough!
Oh right, it's possible for `Item#pb?` to return true, but
`Item#pb_color` to return `nil`, if the item has the paintbrush item
description but we can't find a color whose name matches the item name.
This would be expected if a new color were added to Neopets, and PB
items for it were modeled by the community, but we hadn't manually
added the color to the database yet.
Previously, the Item Getting Guide would crash in this scenario. Now,
it correctly handles the possibility of a `nil` value for `pb_color`,
and shows some placeholder info.
To test this, I temporarily edited some item names to not contain the
color name anymore (e.g. "P-rate Elephante Shirt and Vest"), then
loaded the guide and made changes until it no longer crashed.
I noticed in the app that these queries were slowwww! I was able to
track it down to a bad query plan, as we explain in the comment.
I searched online for "mysql query performance filter on one join table
sort by another", and was surprised to find this answer suggest a
subquery, which I've often been told to expect to be slower compared to
joins? But it certainly worked in this case!
https://stackoverflow.com/questions/35679693/mysql-optimize-join-with-filter-and-order-on-different-tables
