For Alt Style outfits, it's useful to call special attention to the Alt
Style feature as the likely cause of incompatibilities.
(Incompatibilities previously were most often caused by choosing a
species-specific item, then switching to another species. We generally
make it hard to enter this state, by hiding incompatible items during
search.)
Now that the pose picker button can have text content too, things were
getting pretty cramped horizontally on smaller screens! Now we use the
`sm` size when it's small-time.
I'm not planning to port full Alt Style support over to the 2020
frontend, I really am winding that down, but adding a couple lil API
parameters are *by far* the easiest way to get Alt Styles working in
the main app because of how it calls the 2020 API. So here we are, just
using new parameters for DTI 2020 that I'm gonna deploy to impress-2020
first!
Specifically, I was looking at the new "Stormy Cloud Kacheek" items,
and was surprised to find that, in the outfit editor, they all get
grouped under "Markings" (and therefore the UI treats them as
mutually-exclusive via hidden radio button and only bolds one at a
time), but they aren't actually conflicting because they occupy
different zones named "Markings".
In this change, we make the zone groups actually just be *by zone*
rather than jumbling all of the zones with the same label together; but
in most cases, we still keep the same simplified display. In the case
of the "Stormy Cloud Kacheek" items though, we now get a few groups:
`Glasses`, `Markings (#6)`, and `Markings (#16)`. Glasses is chosen
by coincidence because it's the first zone label for that item
alphabetically (even though that item also occupies a third "Markings"
zone), and then the other two know to disambiguate from each other.
There's an opportunity here to cheat things further, like to
*intentionally* select items like "Glasses" that are less ambiguous
when possible. I'm not aware of enough other cases like this for that
to really matter, though, so I'm just leaving it as-is!
I tested this a *bit* on other outfits, and everything looked fine at
a glance, so I'm just moving forward—but I'll make an announcement to
ask people to help take a look!
Two motivations here:
1. Unconverted pets should no longer exist on Neopets.com (and we
especially don't expect new ones), so this logic helps no one.
2. The Baby Pteri keeps getting overridden to be marked as Unconverted
because it has only one asset, which is incorrect.
A decent heuristic for a bygone era, goodbye!
This wasn't causing big problems because we made resilient little
choices in a lot of little places… but it's confusing as a potential
state, and the Styles chooser wasn't selecting the "Default" option
after you switch—which is what tipped us off!
Yay it works(*)! But two major missing pieces:
- Outfit saving doesn't persist it at all
- Item compatibility is unaffected: items will still appear in search
and in the preview, even when they don't fit anymore.
To help with space, I'm just showing the word "Nostalgic" (or "???" if
it's from a series we don't recognize, this is hardcoded by ID), and
trusting that from context it will be obvious that it's the "Nostalgic
Faerie" case or whatever. (Moreover, in both the button and the select
we're omitting the species name, by similar reasoning!)
Note that this _still_ doesn't actually apply the style to the outfit
whatsoever; this is all just local state as we're continuing to play
with UI concepts. Actually applying it is probably next though! (Though
there's a couple more UI things I want to do, like some affordances to
clarify that a Style is applied and that Expression changes won't work.)
Oh right, React Query's API is slightly different, fixed! (Previously,
this would cause the PosePicker to show before all the data was ready,
so alt styles would sometimes pop in after the popover was already
open.)
On small screens, the PosePicker opens down, and we put the tabs on the
top, to be near the button.
On large screens, the PosePicker opens up, and we put the tabs on the
bottom, to be near the button.
Previously, we always set `placement="bottom-end"`, which on small
screens behaved as written, and on large screens there would not be
space to open downward so it would open upward instead.
Now, we set the placement explicitly based on a media breakpoint, and
we change the `flexDirection` of the tabs container on the same media
breakpoint.
I'm playing with using text to call more attention to this button, but
I'm not altogether pleased with the design yet. I'll leave it there for
me and Support users, but hide it for most people until we've got a
more complete concept.
That way, I can stop being on a branch and be working on main, and
deploy stuff to preview live, without having to share it with everyone
just yet! (This was the motivation for finally adding Support tooling
to main DTI lol!)
A little architecture trick here! DTI 2020 authorizes support staff
requests by means of a secret token, instead of user account stuff. And
our support tools still all call DTI 2020 APIs.
So here, we bridge the gap: we copy DTI 2020's support secret to this
app's environment variables (I needed to update
`deploy/files/production.env` and run `bin/deploy:setup` for this!),
then users with the new `support_secret` flag have it added to their
HTML documents in the meta tags. Then, the JS reads the meta tag.
I also fixed an issue in the `deploy/setup.yml` playbook, where I had
temporarily commented some stuff out to skip steps one time, and forgot
to uncomment them after oops lol!
To activate this, I created a `.env.development` file in my project
root, with the following content:
```env
IMPRESS_2020_ORIGIN=http://localhost:4000
```
Then, I started impress-2020 with `yarn dev --port=4000`.
Now, the app loads from there, hooray!! It even fixes that obnoxious
pet state ID bug that happens when you run against the production db lol
Something in the Rails loader doesn't like that I have both a gem and
a lib folder named `RocketAMF`, I think? It'll often work for the first
pet load request, then on subsequent ones say `Envelope` is not
defined, I'm guessing because it scrapped the gem's module in favor of
mine?
Idk, let's just simplify all this by making our own module. I feel like
this old lib could use an overhaul and simplification anyway, but this
will do for now!
Like in 0dca538, this is preliminary work for being able to drop the
`zone_translations` table! We're copying the field over first, to be
able to migrate DTI 2020 safely before dropping anything.
Non-English languages haven't been supported on Neopets for a while, so
I'd like to remove this extra cross-cutting complexity, especially
since it's now inconsistent with the real site anyway!
The main motivation is that I'd like to do this for items too, because
I have a hunch that all the complexity of `globalize` to read
`item.name` is part of what's making large user lists so slow to
render: lots of little objects getting created down the stack, and
needing to be garbage-collected later.
I'm not sure that's why! But I figure removing this complexity is a
simplicity win anyway, so let's do it!
Note that this doesn't *finish* the migration, it just starts it! The
`Species::Translation` and `Color::Translation` models still exist, and
still have their data, and not all references to them are scrubbed yet.
I especially don't want to delete the backing tables until both DTI and
DTI 2020 are ready for it!
So this change will someday be paired with another change to actually
drop the tables - after backing up the data for future records just in
case, of course!
Using good ol'-fashioned cookies! The JS sets it, and then Rails reads
it on pageload. That way, there's no flash of content for it to load in
after JS loads.
If your first wanted list was created before your first owned list,
then `false` would come before `true` in the keys of
`current_user_lists`.
I both fixed this to be more consistent at the model level, because who
likes unpredictable behavior? But also downstream at the view I
hardcoded that true should come before false, because that's a UI
concern that I want to be encoded in the view regardless of what's
upstream.
Oh right, I just remembered how tabs work, they join with the page when
selected! lol
Something about this still feels off to me, but idk, I find it charming
and I wanna just let it rock.
They can just ellipsis, that's fine, the full name is not essential
when you're just scanning the list; you're gonna pop it open and see
the full name during contact anyway.
It was a bit tricky to figure out the right API for this, since I'm
looking ahead to the possibility of splitting these across multiple
pages with more detail, like we do in DTI 2020.
What I like about this API is that the caller gets to apply, or not
apply, whatever scopes they want to the underlying hanger set (like
`includes` or `order`), without violating the usual syntax by e.g.
passing it as a parameter to a method.
I made two mistakes here! One is that you need to round up subpixel
line heights, and the other is that `clientHeight` is what I want, I
shouldn't include the margin!
I guess I deleted this a while ago without really noticing… I think I'd
at some point like to replace this with like, the DTI 2020 improved
table layout thing, but I figured this would be pretty quick to throw
in and make the page not feel like a pain to use lmao
Oh yeah, a long-standing limitation. Good thing we're better at stuff
now!
This is also probably the real cause of the weird number of slight
discrepancies between main DTI and DTI 2020 when I eyeballed stuff lol
oh, well, that and the missing default-lists. A bit messy!
Ahh I see, the way we got away with not having a `trading` scope before
was a weird metaprogramming `{owned/wanted}_trading` situation. Okay,
let's trash that in favor of our new stuff! And that helps us bulk the
queries too which is nice.
In impress-2020, we do a big slow query to figure out which users have
been active in trades recently. Now, we cache that timestamp on the
User model.
This won't have any immediate effect; it's to clear the way for Classic
DTI to receive the better trade ratios feature people like from 2020.
I also added some unit testing infra because I finally wanted it! for
all the ways you can trigger this timestamp lol
Note too that this is a bit of an unusually complex migration, but my
hope is that the batching and query structure and such helps it run
surprisingly fast! 🤞
Poking at the site, I didn't love that clicking any of the NC items on
the homepage took a few seconds to load cuz of the OWLS request taking
a couple seconds.
If the request were faster to load I might decide otherwise, but for
now, let's just keep that cache long.
Another approach we could take would be to ask for an endpoint that
returns all the values at once, so we could cache and update them all
together, instead of having it all split into separate cache keys!
So this was a slightly wrong error message, what was happening was:
1. Trying to load the image hash for this pet, by looking them up at
https://pets.neopets.com/cpn/PET_NAME/1/1.png and seeing what URL it
redirects to.
2. But pets.neopets.com was rejecting our User-Agent string, which
would've been just "Ruby", since we hadn't set it otherwise. I guess
that's an explicitly banned string?
I also found that the kind of more-helpful User-Agent string I like to
write was being rejected, and I could only get it to accept something
very simple? So that's what we're using now, I guess!!
Building toward replacing more of the 2020 data sources! I think this is
an endpoint that benefits from bulk loading, esp with the way the item
page previews work. I also like taking the concept of "canonical" out of
the GQL interface, and instead just loading for each of the 50 species
and letting the client decide. (And then it can fast-swap between them!)
The models folder is a bit confusingly large, these are more mixins and
kinda clutter it. Push them off into `lib`, I think!
I think they used to be in models mainly because Rails used to handle
`lib` differently with autoloading, and it made for a worse dev
experience. Now it's all the same, though!
Self-hosted Plausible instance! I have need of usage numbers again,
after a good few years of just not using it; but I don't want to send
the data to Google, and I enjoy self-hosting things, so here we have it!
We haven't used the mall spider in this app in forever (I guess we even
deleted the code at some point?), but there was some vestigial stuff
left. Goodbye!
There was a static page explaining it, which we no longer link to; and
there was an unused field in the User model for who was a beta tester
for it. Goodbye!
Just moving more stuff over! I modernized Item's `as_json` method while
I was here. (Note that I removed the NC/own/want fields, because I
think the only other place this method is still called from is the
quick-add feature on the closet lists page, and I think it doesn't use
these fields to do anything: updating the page is basically a full-page
reload, done sneakily.)
There was a time when I used an old proxy server to try to fix mixed
content issues, and I eventually removed it but never took the tendrils
out from the code.
We probably _should_ figure out how to secure these URLs! But until
then, we may as well simplify the code.
Ok progress! We've moved the info about what bodies this fits, and
what zones it occupies, into a Rails API endpoint that we now load at
the same time as the other data!
We'll keep moving more over, too!
I changed my mind again! At first I wanted to make the special case
clearer, and to be able to more strongly assert that the species is
not null. But now I'm like… eh, there's code that references `body.id`
that has no reason _not_ to work in the all-bodies case… let's just
keep the types more consistent, I think.
This is more similar to what impress-2020 does, I was working on the
wardrobe-2020 code and took some inspiration!
The body has an ID and a species, or is the string "all".
Preparing a better endpoint for wardrobe-2020 to use! I deleted the
now-unused swf_assets#index endpoint, and replaced it with an
"appearances" concept that isn't exactly reflected in the database
models but is a _lot_ easier for clients to work with imo.
Note that this was a big part of the motivation for the recent
`manifest_url` work—in this draft, I'm probably gonna have the client
request the manifest, rather than use impress-2020's trick of caching
it in the database! There's a bit of a perf penalty, but I think that's
a simpler starting point, and I have a hunch I'll be able to make up
the perf difference once we have the impress-media-server managing more
of these responsibilities.
Ok so, impress-2020 guesses the manifest URL every time based on common
URL patterns. But the right way to do this is to read it from the
modeling data! But also, we don't have a great way to get the modeling
data directly. (Though as I write this, I guess we do have that
auto-modeling trick we use in the DTI 2020 codebase, I wonder if that
could work for this too?)
So anyway, in this change, we update the modeling code to save the
manifest URL, and also the migration includes a big block that attempts
to run impress-2020's manifest-guessing logic for every asset and save
the result!
It's uhh. Not fast. It runs at about 1 asset per second (a lot of these
aren't cache hits), and sometimes stalls out. And we have >600k assets,
so the estimated wall time is uhh. Seven days?
I think there's something we could do here around like, concurrent
execution? Though tbqh with the nature of the slowness being seemingly
about hitting the slow underlying images.neopets.com server, I don't
actually have a lot of faith that concurrency would actually be faster?
I also think it could be sensible to like… extract this from the
migration, and run it as a script to infer missing manifest URLs. That
would be easier to run in chunks and resume if something goes wrong.
Cuz like, I think my reasoning here was that backfilling this data was
part of the migration process… but the thing is, this migration can't
reliably get a manifest for everything (both cuz it depends on an
external service and cuz not everything has one), so it's a perfectly
valid migration to just leave the column as null for all the rows to
start, and fill this in later. I wish I'd written it like that!
But anyway, I'm just running this for now, and taking a break for the
night. Maybe later I'll come around and extract this into a separate
task to just try this on all assets missing manifests instead!
Ahh, I guess I missed these, I think they're maybe not actually used in
the app is why? cuz they're all default values that are overridden at
the actual call sites. But I ran into it when running `Pet.load` in the
console, and yeah let's just fix 'em up!
This hasn't worked for a while, and I don't know an API off the top of
my head to drop in for it. Let's just delete it for now, and revisit it
later if we want to!
Dang, I'm really wishing I'd opened this sooner cuz I didn't realize it
would be THIS easy!!
The bug was that the `t` method started taking Ruby keyword params
instead of a hash object for `options`, so the syntax changed.
Womp womp!
Really don't know why this wasn't a problem with Apollo (or was it??),
but yeah, don't save when there's a save error!! Then we reset the
mutation state when the outfit state changes.
It's weird to be reading this code and be like. was this not always an
issue? Maybe something in Apollo prevented this? Did we use optimistic
UI or something? Idk?
There's still an issue with it infinitely retrying in an error state
though.
Just sharing this out to gather info, since this might be coming kinda
soon!
I also moved the announcement higher up in the template, because it
gets broken on the user lists page which uses floats quite a bit for
the site header—and tbh I feel like this is better anyway lol.
In the impress-2020 app, we use this to prepopulate certain GraphQL
data into the Apollo cache when SSR'ing a page. We don't do that here,
so, goodbye!
The wardrobe-2020 app had a cute drawer that embeds the item page, but
honestly I don't think it was that valuable, and especially not when it
means we have to basically maintain two item pages lol. Let's decrease
the surface area!
A really really simple change! It works on the item page, the item
index page, item search, the homepage, and the item lists page.
The main reason I avoided this for so long (even before modernizing the
Rails app) was that the ElasticSearch stuff felt like it made it messy?
But now it's pretty simple, and it works in search already cuz I did
that when I implemented item search, so, nice!
Ok cool, I have just not been running any of this since moving out of
impress-2020, but now that we're doing serious JS work in here it's time
to turn it back on!!
1. Install eslint and the plugins we use
2. Set up a `yarn lint` command
3. Set up a git hook via husky to lint on pre-commit
4. Fix/disable all the lint errors!
Rather than letting the fact that the server API models outfits a bit
differently (underscore keys, integer IDs for things), I'd rather
convert it to the familiar field names and expected types!
This came in a few parts!
1. Add meta tags to let us know we're logged in.
2. Install React Query, which has the data-loading sensibilities I like
about Apollo without the GraphQL that has honestly been a drag.
3. Replace the outfit-loading and outfit-saving calls with API calls to
the main app.
4. Update the main app's API calls to use our more flexible data
constructs like "pose".
Would've loved to do this more incrementally, but it's hard to! You
can't split out outfit-loading and outfit-saving, or auth from any of
that, or the state gets all out-of-sorts.
Still, this is a good nugget we've pulled out all-in-all, and one that
people have been asking for! Can maybe look to logged-in item search
soon too, for own/want data?
Moreover, this code is in a bit of a flimsy state anyway: it'll kinda
work if you're logged in at impress-2020.openneo.net, but that wasn't
intentionally engineered, and I'm not sure exactly what circumstances
cause those cookies to send vs not send?
My intent is to clean up to replace all this with login code that
references the main app instead… this'll require swapping out some
endpoints to refer to what the main app has, but I'm hoping that's not
so tricky to do, since the main app does offer basically all of this
functionality already anyway. (That's not to say it's simple, but I
think it's a migration in the right direction!)
I used the new profiler tools on this page, and noticed a lot of
allocations in the Globalize library, which we use for translating
database records. I realized that we were loading all of the fields of
not just all of the items on the page, but all of their translation
records in all locales! We used to scrape data for lots of languages, so
that can be quite a lot!
Unfortunately, Rails's `includes` method to efficiently preload related
records always loads all fields, and simply can't be overridden.
So, in this change we write manual preloading code, to identify the
records we need, load them in big bulk queries, and assign them back to
the appropriate associations. Basically just what `includes` does, but
written out a bit more, to give us the chance to specify SELECT and
WHERE clauses!
It shows up in development always, and if you're logged in as Me
Specifically in production!
I'm using this to poke at memory usage for pages that seem suspicious.
I don't know why our app reliably grows so large in RAM, but my hunch is
that maybe there are some pages that just use a truly large amount to
begin with - and I've learned Ruby doesn't release memory back after
it's GC'd, it just grows the process and keeps the free space to itself
in its own heap!
So I'm just eyeing pages that I know *can* have a lot going on, and
seeing what I find!
We used to do this for weird clever caching tricks that I don't think
were actually very effective. We stopped using this a few months ago,
and now I'm finally cleaning up this supporting code!
Huh, Arel can *sometimes* handle just having an attribute stand in as
"X is true" in a condition, but sometimes gets upset about it. I guess
this changed in Rails since we recently wrote this?
Specifically, item search would crash on "is:nc" (but *not* "is:np"),
saying:
```
undefined method `fetch_attribute' for #<struct Arel::Attributes::Attribute relation=#<Arel::Table:0x0000000109a67110 @name="items", @klass=Item(…), @type_caster=#<ActiveRecord::TypeCaster::Map:0x0000000109a66e90 @klass=Item(…)>, @table_alias=nil>, name="is_manually_nc">
```
The traceback was a bit misleading (it happened at the part where we
merge all the scopes together), but that hinted to me that it working
with an attribute in a place where it expected a conditional. So I
converted the attribute in the `is_nc` scope to a conditional, and made
the matching change in `is_np`, and that fixed it! Ok phew!
