At one point we piloted a "Camo" service to proxy HTTPS image urls for us, but it doesn't exist anymore.
We already have proxies and stuff for this, so I left `Image` as a placeholder for this, but it's not working yet!
This also deletes our final reference to the Addressable gem, so we can remove it!
I don't think these work anymore, and our volunteers get new items into the db fast anyway, Impress 2020 is doing better spidering these days. And then we get to remove the cron job `whenever` gem!
Using `s3_path` and stuff made it sound like we were still referencing the original Amazon S3 images - but actually our new asset proxy just uses the same path structure, and we didn't change anything about it.
Oh also I deleted an after_conversion method that isn't used anymore, forgot about that!
We've already swapped out the backend for this stuff to Impress 2020, so the resque task and the broken image report UI aren't actually relevant anymore. Delete them!
This helps us delete Resque soon too.
Idk this one might actually be a bit of a pain to load? But I'd want to optimize it differently anyway, and there's overhauls we're already planning to do here.
Huh! This cache key seemed to only be referenced in checks and expirations, but was never actually used! So I guess we've been loading the modeling predictions every time for a while huh??
We'll get smarter about that someday, but anyway, that lets us delete our Item resque tasks and ItemObserver!
Again I'm just not convinced of the perf on this, and it enables us to delete some whole infra over it, we can improve it another time if it's useful to!
Just removing some caching and the expiration of it! There's still more superfluous(?) caching on the item page to audit, but these seem a bit more sensible about avoiding loading extra data.
In the interest of clearing out Resque, I'm just gonna remove a lot of our more complex caching stuff, and we can do a perf pass for things like big item list pages once everything's upgraded. (I'm hopeful that the upgrades themselves improve perf; and if not, that some improved sensibilities 10 years later can find simpler approaches.)
We uninstalled Flex, our Elasticsearch gem, to replace item search with direct DB queries; but I forgot these calls, oops!
I also kinda want to see about deleting the resque tasks altogether, since I'm not sure how to get Resque installed on latest rails bc there seems to be a conflict over the version of Rack? And it'd be nice to get rid of the complexity if we can.
Back in the day, `all` would immediately load up a query into an array, but now I think it's an alias for what `scoped` used to be: a relation that contains everything.
I want to test some logged-in stuff, but the whole openneo_id app is a mess to integrate with (and I want to eliminate it down the line anyway), so here's a simple hacky thing that just gets you into a test user for development!
Not being a subquery is better! I realized later that a LEFT JOIN would probably do it even betterer? with like `HAVING count(x) = 0`? but the `left_outer_joins` method doesn't seem to be in Rails 4, and I don't want to do stringy joins, so this is fine for now!
Right, previously we were querying "has *at least one asset* that is not in zone X" instead of "has NO assets that are in zone X".
I don't know a fast way to query for that, this will have to do for now!
Not doing the tricks with `is_positive` anymore, instead just calling different functions altogether at the call site.
Also, instead of classes, I feel like this is a lot more concise to just write as class methods that create certain instances of a trivial `Filter` data class. Without the tricks of `is_positive` in play, the value of classes goes way down imo.
Ohh ok, without this change all of our `scope`s were just immediately evaluating the argument and fetching _all_ such matching records immediately, instead of waiting to actually be called. This led to bugs like `pet_type.as_json` returning ALL pet states in the whole db, because the `PetState.emotion_order` scope was being treated as a single predefined query, rather than a query fragment to merge into the current context.
This also explains what happened in 724ed83: that's why things before the scope in the query were being ignored.
lol again this is hard to test so uhh I hope this didn't break it all!! though tbh I feel like we removed this feature or something anyway? idk it stopped working in some way
Tbh I'm not 100% sure this is a fix, I'm not sure what `haml_concat` was doing here, and the page is still crashing so it's hard to say. But fingers crossed!
Idk why, but when the `select` was the first thing in the query, it was getting ignored. I wonder if there's something about the `object_assets` scope that I'm not understanding that's overwriting it? Or the `joins`? But whatever, this works, I'm not worried about it for now!
The controller was like "oh yeah we have that cached" (from previous renders of the app on Rails 3 I think?), but the view disagreed, bc it was appending a template digest to the cache key. That's a smart feature, but not compatible with how we skip queries in the controller, so disable it for now!
We'll need to replace the item search query stuff with direct MySQL queries, but that's not ready yet bc the app still isn't booting, so we're committing this in a known broken state for now!
Rather than figure out how to upgrade the Stripe gem to be compatible with future Rails, I'd rather just delete the references, since it's currently unused.
I'm not so bold as to go in and fully trash all our donation code; I just want to ensure we're not sending people down broken codepaths, and that if they reach them, the error messages are clear enough.
We set up `impress-asset-images.openneo.net` to redirect to the right asset, without needing to depend on AWS anymore for HTML5-converted items!
Our quick fix for this: always serve `has_image: true` to the frontend, so it always tries to use the image, regardless of whether we've marked it as converted in the database. (We've turned off the converters too!)
Oh, yeah, shit, okay, when we set `self.url` like that, it's supposed to be the _canonical_ URL for the SWF, not our proxied one—this is the URL that's gonna go in the database.
We do proxying late in the process, like when we're actually setting up to download something, but for just referencing where the asset lives, we use `images.neopets.com`.
In this change, we revert the use of `NEOPETS_IMAGES_URL_ORIGIN`, but we _do_ update this to `https` for good measure. (We currently have both HTTP and HTTPS urls in the database, I guess neopets.com started serving different URLs at some point, this is probably the future! And anything interpreting these URLs will need to handle both cases anyway, unless we do some kind of migration update situation thing.)
We're migrating the incorrect assets with the following query (with the limit changed to match the number we currently see in the DB, just as a safety check):
```
UPDATE swf_assets SET url = REPLACE(url, 'http://images.neopets-asset-proxy.openneo.net', 'https://images.neopets.com') WHERE url LIKE 'http://images.neopets-asset-proxy.openneo.net%' ORDER BY id LIMIT 2000;
```
Okay, like in the previous commit, we're dealing with forced HTTPS, on a server that isn't going to cooperate with our dependencies' HTTPS version. And this time, I don't think there's a secret origin server that will accept `http://` requests for us.
Thankfully, we have the perfect hack in our back pocket: our own pre-existing images.neopets.com proxy server! I set the following in our secret `.env` file, and now we're good:
```
NEOPETS_IMAGES_URL_ORIGIN=http://images.neopets-asset-proxy.openneo.net
```
Oops, neopets.com finally stopped accepting `http://` connections, so our AMFPHP requests stopped working! And our current dependencies make it hard to make modern HTTPS requests :(
Instead, we're doing this quick-fix: we have a connection who knows the internal address for the Neopets origin server behind their CDN, which *does* still accept `http://` requests!
So, when `NEOPETS_URL_ORIGIN` is specified in the secret `.env` file (not committed to the repository), we'll use it instead of `http://www.neopets.com`. However, we still have that in the code as a fallback, just to be a bit less surprising to some theoretical future dev so they can see the real error message, and to self-document a bit of what that value is semantically doing! (The documentation angle is more of why it's there, rather than an actual expectation that any actual person in the future will run the code and get the fallback.)
There's a bug on Neopets.com that breaks links and images for *.openneo.net, on petpages specifically.
So, we've registered a new domain, and we're using that to serve outfit images now.
I'm a bit hesitant to add a new domain name to our like, permanent URL surface area, lol… but I'm not hearing back from TNT, and I already closed the doors on S3, so… here we are, whatever 😅
TNT started using HTTPS URLs! And our old Ruby version (lol 😬) still requires explicit invocation to perform SSL during a request, so requests were failing!
Now, we explicitly build the `Net::HTTPS` object, and turn on `use_ssl` if it's an HTTPS URL! (The shorthand invocation didn't seem to have an option for this, that I could find!)
Here, we turn off the hooks that enqueue outfit image updates, and we disconnect the `OutfitImageUploader` that manages uploaded S3 URLs, instead replacing it with an `image` method that simulates the same basic API.
This should cause _all_ views on Classic DTI to use the new outfit URLs. Some notable examples:
- The user's Outfits page
- The donations page
- The outfit page, and its sharing metadata
I hope I didn't miss anything in the views that will make this crash stuff! I tested the new model code in the Rails console, and checked it against invocations that I noticed when searching the codebase for `outfit.image` 🤞
Oops, right, I meant to use the new `impress-outfit-images.openneo.net` host for this! It works just fine from `impress-2020.openneo.net` as the backing source right now, but I want these semi-permanent URLs to be a bit more decoupled.
As part of our project to get off S3 and dramatically reduce costs, we're gonna start serving outfit images that Impress 2020 generates, fronted by Vercel's CDN cache! This should hopefully be just as fast in practice, without requiring an S3 storage cost. (Outfits whose thumbnails are pretty much unused will be evicted from the cache, or never stored in the first place—and regenerated back into the cache on-demand if needed.)
One important note is that the image at the URL will no longer be guaranteed to auto-update to reflect the changes to the outfit, because we're including `updated_at` in the URL for caching. (It also isn't guaranteed to _not_ auto-update, though 😅) Our hope is that people aren't using it for that use case so much! If so, though, we have some ways we could build live URLs without putting too much pressure on image generation, e.g. redirects 🤔
This change does _not_ disable actual outfit generation, because I want to keep that running until we see these new URLs succeed for folks. Gonna wait a bit and see if we get bug reports on them! Then, if all goes well, we'll stop enqueueing outfit image jobs altogether, and maybe wind down some of the infrastructure accordingly.
Oops, if you saved `SwfAsset` outside of modeling code, the `item` field would be empty, and so `item.body_specific?` wouldn't happen.
This would trigger when you even just report a broken image!
Now, we always run the SQL query to check for that flag.
Okay so, userlookup stuff hasn't worked in years, because it requires a login now.
But apparently, somewhere recently, the code inside our `neopets` gem started hard crashing, because of assumptions we made about the document we'd get back.
I'm not sure why it only recently started crashing? or if I'm even necessarily right about that?
But anyway, I'm just doing the easiest safest (🤞🏻) change possible: being more generous with the errors we swallow.
Test Plan:
Deploy and cross fingers.
Okay, fine, finally making this controllable from the db without requiring a deploy :P Setting this new field will cause `item.special_color` to return the corresponding color. This mainly affects what we show on the item page, and what colors we request for modeling on the homepage.
We recently flipped the switch for various hosts to force HTTPS, yay! This includes `neopia.openneo.net`.
However, I forgot to change the URL scheme in this file. This meant that the form submit from the homepage would go to `http://neopia.openneo.net/`, then redirect to `https://neopia.openneo.net/`, but only preserve the form data in certain browsers. This change should fix that!
Note: This probably breaks the dev environment, where we don't have a cert for `https://neopia.dev.openneo.net`. I'll fix that some other time!
Interestingly, these items *are* correctly detecting their special
color on the homepage for model progress. So, we *do* have the ability
to detect this. But I don't have good item data locally, so it would
be hard to test this, so I'm just gonna go with the cheap solution
again, sorry XP
In bfd825d, we refactored the "is item body-specific?" check. In the process, we dropped the check for the manual override flag, `explicitly_body_specific?`. Not sure if it was an accident or if I was just _so_ confident that it was gonna work :P In any case, re-add the check!
Okay, surprise, the bug was unrelated to Camo config (though I'm glad I cleaned
that up anyway :P). We now, at a low level, serve a placeholder image for item
thumbnail URL if, for some reason, we don't have a good thumbnail URL on hand.
One time I did a thing called Camo to try to get our HTTPS pages working,
because images.neopets.com not supporting HTTPS is crazy >_> I've diasbled it
these days, but it had debug behavior to append `?NO_CAMO_CONFIG` to all
proxied URLs when Camo was not configured.
When an item had no thumbnail URL for some reason (mall spider needs fixing,
maybe?), this caused Rails to try to map that empty string into the path
`/assets/?NO_CAMO_CONFIG`, which made Rails complain that it was trying to load
an asset that doesn't exist. This is probably a sign that using `image_tag` for
URLs that *should* be external URLs, but aren't strictly *guaranteed* to be, is
unwise - but, for now, I've just disabled that behavior. I hope Rails has a
better escape hatch for the empty string :P
Ooh, this one was nasty, and only one symptom ever got noticed:
1. Pick "Occupies: Collar" in Advanced Search.
You get the text query "occupies:necklace".
2. And, if you try to do "occupies:collar" even in text-based search,
you *also* get the results from "occupies:necklace" mixed in with
the correct results.
The trick is that, in Spanish, zone 24 (necklace) is named "collar",
as is zone 27 (collar). Not sure what to do for Spanish, but this
issue also leaked into English: we really don't want English to return
results for Spanish-named zones.
This is a tricky problem, though, because it'd be nice for es users
to be able to type "occupies:hat". I think we'll have to do the quick
fix for now, though, and just only interpret the query in the current
locale.
Turns out ~22% of our users initially land on a trade list.
We like to keep the campaign off the pages where space is at a
premium, so we try to whitelist it to major landing pages in order
to avoid accidentally creating a bad experience on some page :)
I've been doing this manually via email for a long time,
since building new stuff in the logged-in world was a pain in the old env.
But now here we are! Finally, finally :)
The "fits:8-bit-chomby" search filter was being read as color=8, species=bit.
Now, we split from the right-hand side of the filter instead.
Still a problem for anyone who explicitly types the Spanish/Portuguese
ordering of "fits:chomby-8-bits", but I'm okay with this cheap fix, since
I bet literally nobody has done that in the past month, if ever :P
In particular, outfit_id == 0 would cause outfit_id? to
return false, so it wouldn't run the outfit presence
validation, so /donations/features would try to load
outfit #0 and fail.
Also, flash[:alert] instead of flash[:error] when outfit_id
is bad.
Mostly this was because of Mac's bug where you, in Firefox:
1. Load a real pet with the default appearance (probs Happy Male) into the wardrobe
2. Use a search query containing ":"
3. See the pet biology vanish before your eyes!
I observed that this only happened in cases where the biology stuff in the URL
wasn't replaced by a state number, so figured that it'd probably be good to do
that anyway because biology fields are annoying, and it for some reason seemed
to fix the bug. (Something to do with query parsing and stupid internal state
issues, probably. Ugh. One of these days, I'll re-rewrite all this :P)
Turns out we need to assign closeted to actual items, not
the item proxies, since that's what we check against. (I
would've thought they're backed by the same instance of
the item anyway, but, whatever. The fix works :P)
It turns out that some pets for seemingly nonstandard colors have the
standard body type anyway, and vice-versa. This implies that we should
stop relying on a color's standardness, but, for the time being, we've
just revised the prediction model:
Old model:
* If I see a body_id, I find the corresponding color_ids, and it's wearable
by all pet types with those color_ids.
New model:
* If I see a body_id,
* If it also belongs to a basic pet type, it's a standard body ID.
* It therefore fits all pet types of standard color (if there's
more than one body ID modeled already). (Not really,
because of weird exceptions like Orange Chia. Should that be
standard or not?)
* If it doesn't also belong to a basic pet type, it's a nonstandard
body ID.
* It therefore only belongs to one color, and therefore the item
fits all pet types of the same color.
We used get_multi when preparing the proxies to decide which to
load from the database, but then sent multiple get requests to
Memcache to re-fetch the same data from that get_multi. Silly!
Use the data that's already stored on the proxy anyway.
Right now we're spending too much time expiring cache keys when
getting contributions. The longer-term fix is to move it to a
background task, but it's good to restrict deletions only to usable
locales rather than all the ones that Rails theoretically supports.
Fun bug! If you edit an outfit, but the outfit loads before the
closet items do, then we clone the outfit to give it its new
identity and therefore forget about its item load callbacks.
Now we have a cheap hack to forward item load data to the
outfit's clones. Hooray! Hope this doesn't break tons of things!
