I didn't want to use the word "basic", since "basic colors" generally means like Blue, Red, Green, Yellow… but it was the only one that fit in the space lol
I tried a lot of stuff with "Fits standard pets" and stuff and couldn't get it to work well
Just a little display bug on the homepage. For an item like the "Evil Coconut Half Mask", which was specifically drawn for the standard _and_ major special colors, our previous logic would have said "Baby only" or "Maraquan only" or whatever special color it happened to find first.
Now, we only show the case "Baby only" if it _doesn't_ fit standard pets too.
Note that the Maraquan case is tricky, because the Blue Mynci can also wear Maraquan items lol! For this reason, we check for two standard bodies before declaring that it's meant for standard pets.
I wasn't sure how to fill the space for items that are fully modeled, then realized some basic at-a-glance "who does this fit" would help!
The load time isn't great, I think I need to break out that dependent subquery, but maybe the stale-while-revalidate will cover it well enough at first.
Add a skeleton stripe for the modeling data! Won't show up in most cases because we load fast, but it helps things a lot when it does. (Also, will we keep loading fast with the cache changes on this query?)
To make this fast, I had to tweak the GraphQL resolver a bit to run a filtered version of the query for `newestItems` instead of scanning the full database! But yeah, looking good!
I think I'm gonna want to swap out "Fully modeled" for some insight about who it fits
Okay cool, I noticed that "A Warm Winters Night Background" sometimes animates when other things are playing, but the animations aren't _detected_. (Huh, I actually thought we just didn't schedule ticks in that case? But maybe I'm missing something.)
Anyway, some movies don't use the built-in frames construct to animate, and instead use tweens that hook into the timeline and mutate the stage. Okay! Now we detect those.
This _did_ enable the Play/Pause button on some items that don't actually animate in practice, like the "#1 Fan Room Background", which seems to have an animated string of lights in the corner that got layered incorrectly. Maybe we should add a new glitch type, to flag movies that don't actually animate?
Doing this for two reasons! One is that I want the movie layer component to be a bit thinner in general - I think we might even want to move the fallback image logic out, too.
The second is that I want the onError for something else soon!
Huh, weird. So I reversed the manifest, because you want to get the *last* movie. And I figured that semantic probably extended to PNGs and SVGs too?
But actually, PNGs sometimes have *other* PNGs in the manifest that aren't the relevant asset at all, and are just reference art.
Again, I'm really not sure what the underlying semantic is here? Does the Neopets customizer just display them all, and for the items with this problem, they happen to layer in a way that's not broken?? I would really like to not do that, and I would really like to know the real semantic, but I can't find it >.>
So um, I'm going ahead and using the best semantic that solves the problems I know about? Which is, use the last movie, and use the first PNG. Fingers crossed lol!
I also didn't test this change extensively, because I'm on a train lol
I'm just trusting that this push will be better than what we had before. I tested it on the Dandan MME, which has two JS files, and it took the latter; and the Pathway of Petals Background, which has two PNG files, and it took the former. Success? 😬🤞
Oops, my inbox was getting full of uncaught promise rejections of `loadImage`!
I'm pretty sure they're caused when multiple images in a movie fail to load (e.g. network problems), but we fail to cancel them. So, the first failure would be caught as a part of `Promise.all` in `loadMovieLibrary`, but then subsequent failures wouldn't be caught by anything, and would propagate up to the console and to Sentry as uncaught errors.
In this change, we make a number of improvements to cancellation. The most relevant change for this bug is that `loadMovieLibrary` will now automatically cancel all resource promises when it throws an error! But this improved robustness also enabled us to finally offer a simple `cancel()` method on movie library promises, which we now available ourselves of at call sites, too.
Experiment! Let's see if them being more prominent like this is helpful or annoying 😅
I think this is clunkier in the HTML5 Green Happy Path, but worth it for bringing attention in the error cases.
But I feel like we might tweak this over time!
Huh, so it turns out sometimes the manifest will include old broken conversion attempts!
This fixed the "MiniMME18-S2c: Holomorphic Foliage and Dandan Set", the "Electric Dress" on various species (incl. Aisha), and yeah!
What an interesting discovery 😂
This is because I want to try adding a search footer to the two-column layout, like in Classic DTI—and so I want more screens that _can_ support two-column layout to use it.
Right, cool, yes, this is the thing about partial data; you need to define the loading condition as "relevant data is missing, _and_ loading is still happening".
Ah right okay, when the `ItemSearchResultV2` doesn't have an `id`, Apollo Cache isn't quite so strong about caching conflicting-y fields, like the different parameterizations of `items`.
With this change, we give the search result object an ID, which helps Apollo cache more confidently!
It's just a serialization of the relevant search fields 😅
That's the last itemSearch call site! I'll probably keep it up for other clients for a while though, esp since it doesn't depend on any additional loaders or anything, it's pretty small overall
Updated the comments to reflect this, and also remembered to make them real docstrings lol!
Now, when you click Prev/Next, we show the page number while the items load, rather than blink it in and out!
This is because we're using itemSearchV2, which makes `numTotalItems` cacheable separately from the paginated `items`. Apollo Cache pretty much does this with zero config, we just have to ask for `returnPartialData`!
The main change is that we restructure the query, so that only the parts that are actually affected by pagination depend on those variables!
This will enable the Apollo Cache to trivially cache and show `numTotalItems` while waiting for other pages to load.
I'm gonna make this a bit more powerful later, but just for now, the text "Page 1 of 27" shows up!
I also don't like that the page number has to blink out while we load the new stuff; there are multiple solutions, but tbh I think the Apollo Cache should be the one to handle this, and that we can do it by refactoring the query structure a bit!
I'm seeing uncaught promise rejections in `loadImage`? It's hard to know exactly where it's actually coming from, those _should_ be caught?
My guess is that it's coming from canceled images, which are throwing errors even after loading? I don't totally understand how, because looking back, I don't think the `cancel` method was actually called???
Anyway, I fixed it so cancel actually _is_ called, and that we don't throw errors when the canceled image _correctly_ fails to load.
This should be more robust either way, but hopefully it also stops the flow of errors?
Right, when there are zero layers, we shouldn't say we're loading!
This is a consequence of the HACK below. If we didn't short-circuit the effect when length == 0, then we would go through and successfully load 0 layers.
Movies often have a lot of assets, which are more likely to be cache misses, and take script time to render! So the time until the user sees something is often huge.
Here, we start loading our PNG image at the same time. This is a filesize loading increase, but even in slow connections, it's generally worth it as a _sharp_ improvement in time until you get to see something!
One noteworthy UI weakness here is that we don't show _any_ loading indicator while the image is visible and the movie is still loading. This makes sense from a practical standpoint, but could be a problem when a movie takes a particularly long amount of time. I also want to be cognizant of whether the blink-of-content ever gets annoying! (We could make it fade out 🤔)
In my last change, I didn't try to change the APIs too much, and kept the concept of `crossOrigin` running through `getBestImageUrlForLayer`.
Now, I've moved the `safeImageUrl` call _outside_ `getBestImageUrlForLayer`, by putting it at the call site: We now call `safeImageUrl` from `loadImage` (which needs to know the `crossOrigin` flag anyway!), and at the `img` tag call site.
This simplifies all of the call sites a lot, I think!
I've noticed that our Fastly proxy adds a surprising amount of latency on cache misses (500-1000ms). And, while our overall hit ratio of 80% is pretty good, most misses happen at inopportune times, like loading items from search.
But now that the Neopets CDN supports HTTPS, we can safely switch back to theirs for *most* image loads. (Some features, like downloads and movies, still require CORS headers, which our proxy is still reponsible for adding.)
This forgoes some minor performance wins (like the Download button now requires separate network requests), and some potential filesize reduction opportunities (like Fastly's auto-gzip which we're today using for SVGs, and eventually using their Image Optimizer for assets), to decrease latency. We could still potentially do something more powerful for low-power connections someday… but for now, with the cache miss latency being *so* heavy, this seems like the clear win for almost certainly *all* users today.
I have a hunch that people aren't finding the Download button! I'm not 100% sure what to do about that, but to start, I want right-clicking the image to give you a hint about it 😅
Woo, it's the big UI experiment! Let's see how it plays for folks 😅
Scrolling through a big lists page right now, I think this is a _huge_ improvement, I can get a sense of the lists and what's in them fast, and see matches fast, and dive quickly and with no extra load time when I want more. I'm pleased tbh!
Pulled MarkdownAndSafeHTML into a shared component, and use it on the single list page now too!
I also simplified some of the logic for the item list, because I figure we'll have to give the trade matching stuff its own pass, y'know?
Oops, I pulled `currentUserId` from the wrong place, so it was always acting as if you're logged in! Now, you can see the list page for your own private list!
I'm not sure real item data "should" ever do this? Our "Written Word Shower" had a blank description, but I think that was an error on our end.
Anyway, it's clearer than showing infinite loading, so!
Oops, okay, I guess I didn't test the new preview centering stuff with 1200x1200 images, like the Usul's Damask Markings.
Now, I apply a max size to the whole-ass container, and make the parent responsible for centering it.
So I finally started looking into the race condition that makes item previews sometimes fail to load, and as expected, it was that we were trying to load the movie before CreateJS had necessarily loaded. Usually the timing worked out, esp after a reload, but not under certain circumstances!
Anyway, I've been wanting for a while to just bundle them instead. That'll help us more eagerly load them when we need them, and not depend on external CDNs, and remove a bunch of loading state!
So yeah, I had to learn how the `easeljs` and `tweenjs` NPM packages did their bundling, and how to use `imports-loader` to let them just register straight onto `window`! But we got there and it's pretty nice tbh!
Woof, the "Swirl of Power Effect" item tanks my CPU waaay too much
(I bet it's those 7000x7000 PNGs lolol 😬)
Anyway, before thinking about optimizing specific issues, I'm just adding this emergency switch: if we detect FPS < 2 on any layer, we just pause the whole outfit, until the user decides to unpause.
Oh hey, turns out I was missing a step in movie clip stuff! Images aren't just for sprite sheets, but also sometimes they just want the raw images!
Here, we register them, uwu
Items like "Swirl of Power Effect" and probably others work correctly now!
That said, Swirl of Power takes WAY too much CPU lmao, I want to maybe add some kind of automatic kill switch lol
There are a couple spots where we parse SWF URLs to get the ID out! Most visibly, our Support tools were crashing on it. And internally, manifest loading wasn't working. (I'm not sure if this got caught or if it caused crashes in user space? I didn't see them when wearing a failing item)
Anyway, fixed now!
This is because it's the terminology I'm using elsewhere ("Items" and "Closet" are too overloaded in the UI), and because I want to start putting specific lists at like `/user/:userId/lists/:listId`!
I also create a redirect from the old URL, and also from the DTI Classic variant of the URL
Ah right, React state batching doesn't always work how I expect it to. The separate state caused the hook to return and cache `{loading: false, error: null, data: null}`, and then on a _later_ tick the data value showed up, but only _after_ the response was already cached!
This broken a bunch of species/color picker stuff, now it's fixed!
Okay, so getting the initial render down time for these faces is annoying, though I might come back to it…
But actually, the _worst_ part isn't the _initial_ render, which just kinda gets processed as part of the page navigation, right?
The _worst_ part is that we render it slowly _twice_: once on page load, as we send the `useAllValidPetPoses` fetch request; and then again when the fetch request ~instantly comes back from the network cache.
The fact that this requires a double-render, instead of just rendering with the cached valids data in the first place (like how our GraphQL client does), causes a second and highly-visible render of a slow-to-render UI!
So, here we update `useAllValidPetPoses` to cache its response in JS memory, similar in principle to how Apollo Client does. That way, we can return the valids instantly on the first render, if you already loaded them from the homepage or the wardrobe page or another item page!
This is a pretty easy change, that makes re-renders faster when something about the item preview state changes!
That said, the initial render is still pretty slow, too, and that's the one that's bothering me more lol
Ah oops, because I forgot to set `hiResMode` here in the image preloader, we would preload the PNG, and _then_ load the SVG separately.
This doubled the effective image loading time in Hi-Res Mode!
Now, the image preloader respects hi-res mode, and will preload the SVG in the SVG case, and the PNG in the PNG case.
If you're not in hi-res mode, then you don't care about broken SVGs, because you wouldn't have seen them anyway!
We also update the message to reference Hi-Res Mode.
We're just having too many glitchy SVGs for my taste, esp since TNT seems to just be using PNGs for now?
This change defaults us to using PNGs for users by default, with the option to use SVGs as a new "hi-res mode" setting.
This is our first ever setting, wow!
I'm also envisioning that like, if we get Fastly Image Optimizer set up, this could be a way to tune the quality of the incoming images.
We could also consider a setting to turn off animations altogether—like, just download the PNG instead of the movie, whereas right now we download the movie on the assumption that you might play it at any time.
The way we were checking for UC compatibility issues, was also triggering while the appearance was still loading, so items didn't have any appearance layers yet!
Now, we check for loading before testing for that glitch.
Oh right, adding user data to this query makes it uncacheable!
Split the query into the main public data, which will cache; and the user data, which will load in later.
I refactor the hide-badge thing into 3 "trade matching modes". Then, the logic for whether to hide specific badges moves into the component, and we use that same flag to decide whether to show the big word "match"!
Boom, cute owns/wants badges on "Latest items", and the item search page, and trade matches!
I'm gonna add some additional flair to the trade match case, too!
This has been bugging me for a while lol, the background was leaking out of the corners!
I had applied the styles to the `InputGroup` because I didn't realize how Chakra implements this… I had assumed that the left/right elements wouldn't also get the background.
But it turns out, `InputGroup` uses `position: absolute` stuff, and uses padding to create visual space in the `Input` below them! So, this works perfect!
Copied styles from the similar layout in the bulk converter tool! The status will flush to the right of the field header on desktop, and move below the input on mobile.
This was a known oversight, that I've finally fixed because I realized this subquery probably would be just fine lol!
Now, instead of removing rows with _all_ species modeled, we remove rows with all species _for that color_ modeled.
This leaves the rest of the modeling list unchanged, but removed 10 Maraquan items that were done modeling but still on the list:
- Dyeworks Coral: Maraquan White Beaded Gown
- Dyeworks Green: Maraquan White Beaded Gown
- Dyeworks Lavender: Maraquan White Beaded Gown
- Dyeworks Purple: Maraquan Wig with Negg Accessory
- Dyeworks Lavender: Maraquan Sea Blue Gown
- Dyeworks Pink: Maraquan Sea Blue Gown
- Dyeworks Silver: Maraquan Sea Blue Gown
- Maraquan White Lace Gown
- Underwater Maraquan Markings
(I also went in the database and marked the "Maraquan Ocean Blue Contacts" with the `modeling_status_hint = "done"`, because it's not compatible with Lutari.)
Oops, right, I forgot for a while that GraphQL fields have a special syntax for docstrings, and it's not just comments! This will help stuff show up in our GraphQL Playground API docs correctly 🥰
I'm not sure which image url is better to return from stuff like this, and I don't actually have a use case for it anymore, so let's just clear it out until we need something like it!
Oops, we get a _lot_ of outfit image requests, and it's pushing the limits of our free Honeycomb plan! But I don't really need all that much detail, because there's so many.
So, we here apply sampling! `api/outfitImage` is getting a 1/10 rate, and for GraphQL, `ApiOutfitImage` is getting 1/10, and `SearchPanel` is getting 1/5.
I had to add a `addTraceContext` call, to give all the child events awareness of what operation they're being called in, too!
I haven't actually tested that this is working-working, just that the endpoints still return good data. We'll see how it shakes out in prod!
But I did add `console.log(sampleRate, shouldSample, data);` to the `samplerHook` briefly, to see the data flow through, and I reloaded a `SearchPanel` request a few times and observed a plausibly 20% success rate.
Oops, I wasn't requesting `bodyId` for item layers, so the check for `layer.bodyId !== "0"` was always true—because it was always `undefined`, even when it should have been `"0"`.
This wasn't an issue on the client, because the client _does_ request `bodyId` for caching item appearances between pets of the same body, and I didn't realize that it needs to be part of this fragment too!
Mm right, when we first render the output, `imageUrl` is `undefined`, so the output textbox renders with `value={undefined}`, which is an "uncontrolled" component that the DOM is free to change.
In practice, this isn't an issue because the textbox has `isReadOnly`, so the user can't _actually_ change it. But it's still a good idea for consistency and clarity to use an empty string instead of `undefined`, and it removes warning spam from my console!
