Simple enough to start! If `shadowbanned: true` gets set on a user,
then we show a 404 instead of the actual list page, *unless* you're
logged in as that user, or coming from a known IP of that user.
This isn't a very strong mechanism! Just something to hopefully
increase the costs of messing around with list spam.
Just a lil blurb to make sure it's clear that NC sales and stuff are
forbidden! I imagine the people doing it know this, but I want to make
sure we're being explicit, in case there's any element of
miscommunication.
This hasn't been causing issues as far as I know, I just noticed
*months ago* that I forgot to do this, and have had a sticky note about
it on my desk since then lol.
I tested this by temporarily setting the timeout to `0.5`, and watching
it fail!
A further optimization, this lets us use the image hash as the new hash
for the pet type if it would be useful! (whereas before this change,
we'd dip into `fetch_metadata` and just get back `nil`, which was okay
too but a little bit less helpful!)
Ahh, we recently added a step to pet loading that sends a metadata
request to `PetService.getPet`, which is now (in a sense, correctly!)
raising a `PetNotFound` error when we try modeling with a "pet" that
starts with `@` (a trick we use in situations where we can get an image
hash for a modeling situation, but not an irl pet itself).
In this change, we make it no longer a crashing issue if the pet
metadata request fails: it's not a big deal to have a `PetType` have no
image hash or not have it be up-to-date!
In the next change, I'll also add an optimization to skip fetching it
altogether in this case—but I wanted to see this work first, because
the more general resilience is more important imo!
Ah right, now that you no longer need to provide this secret value as a
query param or a cookie in order to see NeoPass stuff, we can safely
delete it! Goodbye! 👋
In particular, we got feedback that it was surprising to not get to
check which NeoPass you wanted to use, and that the permissions were
never prompted again. I figure let's err on the side of ample clarity!
As part of this, I've added the new `external_link_icon` global helper,
which embeds an SVG from Chakra UI. That's just the convenient place I
know to grab that icon, and I did it this way instead of an `img` tag
because that enables the `currentColor` thing to work instead of coming
out black!
Not getting a lot of takers, I think it was wise to start small just in
case, but there doesn't seem to be a floodgate problem, so let's remove
the limitations and increase the ask! (But still not a full launch yet,
because I want to funnel people through the feedback process first.)
Got the icon and background style from Neopets.com! I didn't quite copy
the whole button style, both because getting it to play nice with our
existing styles didn't *immediately* work, but also because I think
this works out as a really good compromise between our two styles
anyway!
Yay, we got the API endpoint for this! The `linkage` scope is the key.
Rather than pulling back the specific fallback behavior we had wrote
for usernames before, which was slightly different and involved
appending `neopass` in there too (e.g. `matchu-neopass-1234`), I
figured let's just use a lot of the same logic, and just use the
preferred name as the base name. (I figure the `neopass` suffix isn't
that useful anyway, `matchu-1234` kinda looks better tbh! And it's all
fallback stuff that I expect serious users to replace, anyway.)
Note: I validated this was working by temporarily changing the URI to
`https://echo.free.beeceptor.com`, which echoes the headers back, then
called `OwlsValueGuide.load_itemdata` directly.
Note: I validated this was working by temporarily changing the URI to
`https://echo.free.beeceptor.com`, which echoes the headers back, then
called `NeopetsMediaArchive.load_file_from_origin` directly.
Oh right, I never did catch this when setting up User-Agent in the app!
(I noticed this because I'm making a new request now, and went to look
how we set it in previous stuff, and was like. Oh. We don't anywhere
right now. Interesting LOL)
Oh right, if you can remove your email, there's a way to fully lock out
your account:
1. Create account via NeoPass, so no password is set.
2. Ensure you have an email saved, then disconnect NeoPass.
3. Remove the email.
4. Now you have no NeoPass, no email, and no password!
In this change, we add a validation that requires an account to always
have at least one login method. This works well for the case described
above, and also helps offer server-side validation to the "can't
disconnect NeoPass until you have an email and password" stuff that
previously was only enforced by disabling the button.
That is, the following procedure could also lock you out before,
whereas now it raises the "Whoops, there was an error disconnecting
your NeoPass from your account, sorry." message:
1. Create account via NeoPass, so no password is set.
2. Ensure you have an email saved, so "Disconnect" button is enabled.
3. Open a new browser tab, and remove the email.
4. In the original browser tab, click "Disconnect".
This is gonna help me in development, to stop having to add stuff to
the URL all the time!! I also considered just always making it
available in development, but I wanted to match production behavior to
help us ensure the hiding behavior is working, to avoid leaking NeoPass
without realizing.
Ahh okay tricky lil thing: if you show the settings page with a partial
change to `AuthUser` that didn't get saved, it can throw off the state
of some stuff. For example, if you don't have a password yet, then
enter a new password but leave the confirmation box blank, then you'll
correctly see "Password confirmation can't be blank", but you'll *also*
then be prompted for your "Current password", even though you don't
have one yet, because `@auth_user.uses_password?` is true now.
In this change, we extend the Settings form to use two copies of the
`AuthUser`. One is the copy with changes on it, and the other is the
"persisted" copy, which we check for parts of the UI that care about
what's actually saved, vs form state.
Ah okay, if you leave the password field blank but don't have one set,
our simple `update` method gets annoyed that you left it blank.
In this change, we simplify the model API by just overriding
`update_with_password` with our own special behavior for the
no-password case.
Simplified this a bit into a helper. It's kinda odd to me, but
convenient for this moment, that Rails allows views to read `params`! I
guess it's for escape hatches exactly like this! lol
including validation logic to make sure it's not already connected to
another one!
The `intent` param on the NeoPass form is part of the key! Thanks
OmniAuth for making it easy to pass that data through!
Ahh I see, if you do a no-op update, it still clears the
`previously_new_record?` state, so our NeoPass controller thinks this
account already existed. Instead, let's only do this update if it's an
account that already exists, instead of depending on the no-op-iness!
I'm getting ready to add handling for "what if you don't *have* a
current password*??", so it seems like the right way to do that is to
just eject the controller and start customizing!
That is, you're required to add a password *or* an email before
disconnecting your NeoPass, but idk, I think it's rude to demand an
email from someone for the sake of *disconnection*. Email is no longer
required for accounts that already exist!
This is more consistent with the `uses_omniauth?` we already have, and
it also will help for the next change, where I want a `uses_password?`
method (and using the name `password?` breaks some of Devise's
validation code).
Ahh right, in development `User` and `AuthUser` will have the same ID,
but that got messed up early on for us in production DTI 😅
Here, we switch the form to reference the `User` instead of the
`AuthUser` (to get the ID right), then we also change how we compare
the IDs, because `User#to_param` appends extra text onto the ID after
the number!
Motivation is that I wanna add NeoPass stuff to here! But also like,
it's looked bad for a long time, let's clean it up!! (I just used the
Devise default without any styling at all lol)
Huh, I was writing up an API inventory doc to send to TNT, and was
gonna explain why we proxy these assets… but turns out we don't need to
anymore! Nice!
This is a bit fragile if they ever change their headers, so I'll
mention that in the doc, but for now, yeah sure let's save the planet
some computational effort!
Previously, the way we loaded the image hash for a given pet was to
navigate to `https://pets.neopets.com/cpn/<pet_name>/1/1.png`, but
*not* follow the redirect, and extract the image hash from the URL
where it redirected us to.
In this change, we refactor to use the AMFPHP RPC `PetService.getPet`
instead. I don't think it had this data last time I looked at it, but
now it does! Much prefer to use an actual RPC than our weird hacky
thing!
(We might also be able to use this call for other stuff, like
auto-labeling gender & mood for pet states, maybe?? That's in this data
too! We used to load petlookups for this, long long ago, before the
petlookup captchas got added.)
