Just stripping out the big React component, and having Rails output it!
There's a lot of work rn in extracting the Impress 2020 dependency from
the `wardrobe-2020` React app, and I'm just curious to see if we can
simplify it at all by pulling this stuff *way* back to basics, and
deleting the item page part of `wardrobe-2020` altogether.
In this draft, we regress a lot of functionality: it just shows the
item on a Blue Acara, with no ability to change it! I'm gonna play with
putting more of that back in.
I also haven't actually removed any of the item page React code; I just
stopped calling it. That can be a cleanup for another time, once we're
confident in this experiment!
Oh right, this previously logic was silly: we can't count on the
*interval itself* to be reliably resetting the FPS counter state,
because the interval might not be firing!
I think this fix worked when I tried brief tests, but didn't work when
I did an (accidental) longer test, because the browser switched to a
more aggressive throttle mode, and the previous mode was close enough
on the resets for it to be fine, whereas this time the FPS counter
state got way too old.
Now, we reset the FPS counter state *exactly* when the page comes back.
We have a feature to check the movie's FPS, and pause it if it gets too
low, as a guard against especially low-performance movies. But this was
triggering in an *expected* case, where browsers intentionally throttle
interval events when a page is in the background (e.g. you switch to
another tab).
Now, our rendering is aware of page visibility: when the page is
hidden, don't bother rendering, and keep resetting the FPS counter
state, so that we can pick up with a fresh FPS counter when the page
comes back.
Make them the same size, add spacing between them, and also put the
"Get these items!" on the right, because the list is right-aligned and
the Save button has dynamic width (the save vs saving vs saved states),
so this makes things a lot more consistent and stable!
You can now go to `/outfits/new?features=get-these-items` to start
seeing the "Get These Items!" button in the outfit editor!
I haven't tested it a ton yet, but yeah here it is!
Oops, prior to this commit, searching for "white peach" would return
nothing, whereas now it correctly returns the "Dyeworks White: Just
Peachy Filter", like if you search in the Infinite Closet!
This solution is a bit hacky, wrote some more in the comments about how
to maybe do this better!
Huh, I was writing up an API inventory doc to send to TNT, and was
gonna explain why we proxy these assets… but turns out we don't need to
anymore! Nice!
This is a bit fragile if they ever change their headers, so I'll
mention that in the doc, but for now, yeah sure let's save the planet
some computational effort!
Ah beans, I didn't notice when doing my Turbo fixes in
40804c1543, that I had accidentally
prevented Chakra from applying some of its usual global styles! This
caused some minor visual regressions in various parts of the app, e.g.,
the default border color for the search field in the wardrobe app
became way darker.
Here, instead of copy-pasting the styles and missing some parts, we
scope the global styles a bit more carefully: we first use
`extendTheme` with the same code as Impress 2020 to get a good
`globalStyles` function that includes Chakra's defaults, *then* delete
the key from the theme.
Then, in `ScopedCSSReset`, we use code similar to Chakra's own global
style application code: call the `globalStyles` function with the
current theme and color mode, use Chakra's `css` function to convert
values like `green.800` to CSS values, prepend our scoping rule onto
the selectors, and drop it into our Emotion CSS.
Tbh I was worried because when I first noticed this issue while on my
trip, I saw the black item search box border, and was like "ah dang,
did I destroy all the color in the app by breaking the part where
Chakra defines its CSS color variables??" And no, that's not actually
what happened, a lot of the app still had its colors!
So this was less pressing than I had thought, but still good to get
fixed!
Finally getting around to this because, with Turbo in play, it applies
to subsequent *pages* too, oops! Previously we at least had the blast
radius of this known issue constrained to the item page itself lol :p
Oh right, we don't have Rails UJS going on anymore, which is what
handled the confirmation prompts for deleting lists. Turbo is the more
standard modern solution to that, and should speed up certain
pageloads, so let's do it!
Here I install the `turbo-rails` gem, then run `rails turbo:install` to
install the `@hotwired/turbo-rails` npm package. Then I move
`application.js` that's run all on pages but the outfit editor into our
section of JS that gets run through the bundler, and add Turbo to it.
I had to fix a couple tricky things:
1. The outfit editor page doesn't play nice with being swapped into the
document, so I make it require a full page reload instead.
2. Prefetching the Sign In link can cause the wrong `return_to` address
to be written to the `session`. (It's a GET request that does, ever
so slightly, take its own actions, oops!) As a simple hacky answer,
we disallow prefetching on that link.
Haven't fixed up the UJS stuff for confirm prompts to use Turbo yet,
that's next!
I previously added a warning to the item page, and thought about doing
one here but was sicky and misjudged the complexity and forgot you
don't need to hook into the `knownGlitches` API field to do it! Easy
peasy for a hacky little bug message!
The main *intended* user-facing effect of this is that "Items you own"
and "Items you want" filters should work in wardrobe-2020 now!
It is also possible that I messed something up and that this might
break unrelated searches somehow! We'll find out!! 😅
Did this before we had the ability to trigger searches from the app
itself, to allow me to open up the browser JS console and call this
function directly. Now we can just do it in app, goodbye!
Oh right, `imageUrl` is the name of the field relative to what the app
expects, but under the hood `useOutfitAppearance` actually makes that
an alias for `imageUrlV2(idealSize: SIZE_600)`.
So we need to cache it as the same field with the same params, rather
than as just plain `imageUrl`!
This fixes the bug where wearing an item from search would require a
network round-trip and visually remove all items in the meantime.
(Also, none of this issue was visible to most users, because item
search is still feature-flagged onto the old GQL one for most people!)
This makes clicking on search results in the new mode actually work! It
correctly adds it to the outfit, and removes other items.
The thing that's behaving strangely is that, when you add the item, we
visually remove all items until we can finish a fresh network request
for what they should all look like. This probably means that the cache
lookup for `useOutfitAppearance` is not as satisfied with what we cache
here as `findItemConflicts` is? Something to investigate!
It'd be nice to customize the message a bit, but this should be rare
and I'd prefer the simplicity of just going with the default text.
I ran into this when I made a mistake in how I process the return value
of search results, so React Query caught and raised the error via
React, as intended! And I was annoyed that it wasn't logged anywhere,
so that's my motivation for this change—but also, the old message is
pretty meh and has some layout problems anyway.
For now, I'm doing it with a secret feature flag, since I want to be
committing but it isn't all quite working yet!
Search works right, and the appearance data is getting returned, but I
don't have the Apollo Cache integrations yet, which we rely on more
than I remembered!
Also, alt styles will crash it for now!
Adding new functionality to the item search JSON endpoint, and adding
an adapter layer to match the GQL format!
Hopefully this will be pretty drop-in-able, we'll see!
Clearing the way to be able to delete the announcement banner, which is
currently the only link!
I feel like there's room to redo the site layout to find a place to
more properly link to this from, but I don't have one yet! And this is
enough of a niche reference that I think this is good enough?
A bit of a hack, because the thing triggering it was also a bit of a
hack? I feel like there's something we gotta do with refactoring how
our multiple concepts of state are managed… but in any case! This seems
to keep basic outfit-loading working, while no longer getting us
trapped in autosave loops!
Here's how I reproduced the bug:
1. Open a saved outfit.
2. Set the browser devtools to apply a latency of 5sec to all requests.
3. Add an item to the outfit, and wait for the autosave to start.
4. While it still says "Saving", remove the item again.
5. Watch how, when the first autosave request comes in, the item is
re-applied to the outfit, then autosave gets stuck looping forever.
The issue was that, when an outfit finishes saving, the change in
outfit data was triggering this effect in `useOutfitState` that was
*meant* to *initialize* local state from the saved outfit, not to keep
them in sync all the time. (In general, when saved outfit data comes
back from the server, we don't want to use it to "fix" local outfit
state in the case of discrepancies, because the most common source of
discrepancy will be the user having made further changes!)
But anyway, one thing I didn't realize is that we *were* depending on
this hacky hook to do more than I thought: it was responsible for
syncing `id` and `appearanceId` to the local state after saving the
outfit. So, I replaced the `rename` action dispatch here with a new
action that explicitly sets all fields the server is responsible for!
Ah yeah, if you're not on the wardrobe page (so we don't need the Alt
Styles UI), and the outfit's `altStyleId` is null (as is the case for
the item preview page), then there's no need to load the alt styles for
that species.
So before this change, going to `/items/123` would include an XHR
request to `/species/<id>/alt-styles.json`, which would not be used for
anything. After this change, that request is no longer sent. Hooray!
The alt styles controller is the one place we use this right now, but
I'm planning to generalize this to loading appearances during item
search, too!
I also add more `only` fields to the alt styles `as_json` call, because
idk it feels like good practice to both 1) say what we need in this
endpoint, rather than rely on default behavior upstream, and 2) to
avoid leaking fields we didn't realize were on there. (And also to
preserve bandwidth, too!)
I thought this refactor of this change was working, but actually it was
just failing to build the JS lmao. Here's a version with correct syntax!
😅
Is there a syntax for this kind of thing that I'm just forgetting? Idk,
oh well!
Okay right, the wardrobe-2020 app treats `state` as a bit of an
override thing, and `pose` is the main canonical field for how a pet
looks. We were missing a few pieces here:
1. After loading a pet, we weren't including the `pose` field in the
initial query string for the wardrobe URL, but we _were_ including
the `state` field, so the outfit would get set up with a conflicting
pet state ID vs pose.
2. When saving an outfit, we weren't taking the `state` field into
account at all. This could cause the saved outfit to not quite match
how it actually looked in-app, because the default pet state for
that species/color/pose trio could be different; and regardless, the
outfit state would come back with `appearanceId` set to `null`,
which wouldn't match the local outfit state, which would trigger an
infinite loop.
Here, we complete the round-trip of the `state` field, from pet loading
to outfit saving to the outfit data that comes back after saving!
This happens on the Baby Kougra, where for most poses half of the
assets have a manifest that includes an SVG but no PNG. Skip 'em!
I considered adding a glitch tag for this, but idk I think we can do
that once we're aware of an actual case where this causes visible
issues.
On the small-screen layout, the popover goes down and covers the item
list, which isn't a big deal in context; so I want it to be basically
as tall as it can be without being unwieldy, to give more info.
But on the large-screen layout, it doesn't take long at all for the
popover to start intersecting the pet preview, because it *has* to go
up and cover the pet preview. So, I'm much more reserved about how much
vertical space I'm willing to give it!
(I also considered sending the popover off to the *right* of the button,
to cover the item list, but it felt *way* too weird imo! Especially in
the expressions case.)
The intent of this glitch message was that, when UC or Invisible pets
hide an item because of a zones-restrict thing, it would still show up
in the items panel as fitting a certain zone, whereas it should have
been in the "Incompatible" section and having none of its zones applied.
But the previously implementation would like, show this message even for
items that _were_ correctly marked as Incompatible? And that the server
returned no layers for, because it doesn't fit this body type to begin
with? (e.g. put a Grarrl hat on a Grarrl, then switch to Acara, and the
Grarrl hat is marked Incompatible—but would also show this confusing
message; or similarly with switching to Alt Styles)
So, when the server just returned no layers for this item to begin with,
don't show this message!
Now that we're tracking tab state ourselves, it's pretty easy to just
pass the `initialFocusRef` to the right place instead of to both!
This helps switching between the tabs feel a lot smoother, because we
don't have to re-render and fade-in all the poses again.
I'm keeping it in the same place for now rather than trying to fold it
into Styles, because I think that's net-less-confusing (since Styles
work pretty differently, e.g. different color requirements), and
certainly less work either way lol!
For Alt Style outfits, it's useful to call special attention to the Alt
Style feature as the likely cause of incompatibilities.
(Incompatibilities previously were most often caused by choosing a
species-specific item, then switching to another species. We generally
make it hard to enter this state, by hiding incompatible items during
search.)
Now that the pose picker button can have text content too, things were
getting pretty cramped horizontally on smaller screens! Now we use the
`sm` size when it's small-time.
I'm not planning to port full Alt Style support over to the 2020
frontend, I really am winding that down, but adding a couple lil API
parameters are *by far* the easiest way to get Alt Styles working in
the main app because of how it calls the 2020 API. So here we are, just
using new parameters for DTI 2020 that I'm gonna deploy to impress-2020
first!
Specifically, I was looking at the new "Stormy Cloud Kacheek" items,
and was surprised to find that, in the outfit editor, they all get
grouped under "Markings" (and therefore the UI treats them as
mutually-exclusive via hidden radio button and only bolds one at a
time), but they aren't actually conflicting because they occupy
different zones named "Markings".
In this change, we make the zone groups actually just be *by zone*
rather than jumbling all of the zones with the same label together; but
in most cases, we still keep the same simplified display. In the case
of the "Stormy Cloud Kacheek" items though, we now get a few groups:
`Glasses`, `Markings (#6)`, and `Markings (#16)`. Glasses is chosen
by coincidence because it's the first zone label for that item
alphabetically (even though that item also occupies a third "Markings"
zone), and then the other two know to disambiguate from each other.
There's an opportunity here to cheat things further, like to
*intentionally* select items like "Glasses" that are less ambiguous
when possible. I'm not aware of enough other cases like this for that
to really matter, though, so I'm just leaving it as-is!
I tested this a *bit* on other outfits, and everything looked fine at
a glance, so I'm just moving forward—but I'll make an announcement to
ask people to help take a look!
This wasn't causing big problems because we made resilient little
choices in a lot of little places… but it's confusing as a potential
state, and the Styles chooser wasn't selecting the "Default" option
after you switch—which is what tipped us off!
Yay it works(*)! But two major missing pieces:
- Outfit saving doesn't persist it at all
- Item compatibility is unaffected: items will still appear in search
and in the preview, even when they don't fit anymore.
