Commit graph

30 commits

Author SHA1 Message Date
acb52cb870 Move NCMall and NeoPass services into a Neopets module
Just a bit more clarity of grouping! I'm also thinking about extracting
modeling APIs into a service file like this too, in which case I think
this would help clarify what it is.
2024-10-18 17:27:15 -07:00
644b181ed0 Use Neopets username as base name for new NeoPass accounts, if possible
Yay, we got the API endpoint for this! The `linkage` scope is the key.

Rather than pulling back the specific fallback behavior we had wrote
for usernames before, which was slightly different and involved
appending `neopass` in there too (e.g. `matchu-neopass-1234`), I
figured let's just use a lot of the same logic, and just use the
preferred name as the base name. (I figure the `neopass` suffix isn't
that useful anyway, `matchu-1234` kinda looks better tbh! And it's all
fallback stuff that I expect serious users to replace, anyway.)
2024-04-09 07:48:13 -07:00
58d86cf3ac Prevent user from removing all their login methods
Oh right, if you can remove your email, there's a way to fully lock out
your account:

1. Create account via NeoPass, so no password is set.
2. Ensure you have an email saved, then disconnect NeoPass.
3. Remove the email.
4. Now you have no NeoPass, no email, and no password!

In this change, we add a validation that requires an account to always
have at least one login method. This works well for the case described
above, and also helps offer server-side validation to the "can't
disconnect NeoPass until you have an email and password" stuff that
previously was only enforced by disabling the button.

That is, the following procedure could also lock you out before,
whereas now it raises the "Whoops, there was an error disconnecting
your NeoPass from your account, sorry." message:

1. Create account via NeoPass, so no password is set.
2. Ensure you have an email saved, so "Disconnect" button is enabled.
3. Open a new browser tab, and remove the email.
4. In the original browser tab, click "Disconnect".
2024-04-09 06:40:56 -07:00
f450937952 Oops, fix error when saving user settings with no password set
Ah okay, if you leave the password field blank but don't have one set,
our simple `update` method gets annoyed that you left it blank.

In this change, we simplify the model API by just overriding
`update_with_password` with our own special behavior for the
no-password case.
2024-04-09 06:20:13 -07:00
d10c11e261 Oops, fix tracking neopass_email on account creation.
My bad!
2024-04-09 05:45:39 -07:00
5cc219c795 Connect a NeoPass to an existing account
including validation logic to make sure it's not already connected to
another one!

The `intent` param on the NeoPass form is part of the key! Thanks
OmniAuth for making it easy to pass that data through!
2024-04-08 05:33:58 -07:00
09bccd41da Oops, stop saying "Welcome back" for new NeoPass users!
Ahh I see, if you do a no-op update, it still clears the
`previously_new_record?` state, so our NeoPass controller thinks this
account already existed. Instead, let's only do this update if it's an
account that already exists, instead of depending on the no-op-iness!
2024-04-08 05:00:27 -07:00
3e92d89765 Fix error when multiple accounts have a blank email address 2024-04-08 03:46:41 -07:00
ed89380152 Oops, allow NeoPass to be disconnected if you have no email address
That is, you're required to add a password *or* an email before
disconnecting your NeoPass, but idk, I think it's rude to demand an
email from someone for the sake of *disconnection*. Email is no longer
required for accounts that already exist!
2024-04-07 08:42:41 -07:00
54a052848a Disable disconnecting NeoPass if no password/email is set
Just as a precautionary thing! Seems polite.
2024-04-07 08:27:02 -07:00
b827727102 Rename AuthUser#neopass? -> AuthUser#uses_neopass?
This is more consistent with the `uses_omniauth?` we already have, and
it also will help for the next change, where I want a `uses_password?`
method (and using the name `password?` breaks some of Devise's
validation code).
2024-04-07 08:12:38 -07:00
88a2688ac8 Add form to disconnect NeoPass
Can't connect it back yet! But you can disconnect it! :3
2024-04-07 07:52:23 -07:00
21b967f83d Add some NeoPass info to the Settings page, if you have one
No buttons to change it or anything, or to link if you don't! Just a
basic display and explanation!
2024-04-07 07:17:33 -07:00
d5c3bc087e Track neopass_email when logging in with NeoPass
Gonna use this in the Settings UI to communicate what NeoPass you're
connected to!
2024-04-07 07:17:07 -07:00
6618651fcb Use completely random NeoPass usernames for now
Ahh, I had assumed the `uid` provided by NeoPass would be the user's
Neopets username, but in hindsight that was never gonna work out since
NeoPass doesn't think of things in terms of usernames at all!

For now, we create 100% random NeoPass usernames, of the form
"neopass-shoyru-5812" or similar. This will be an important fallback
anyway, because it's possible to have a NeoPass with *no* Neopets.com
account attached.

But hopefully we'll be able to work with TNT to request the user's main
Neopets account's username somehow, to use that as the default when
possible!
2024-04-01 05:57:06 -07:00
b03d9b264a Increase maximum username length to 30
I'm writing some code for default NeoPass usernames, and they can get
kinda long, so I want to clear some extra space for them!
2024-04-01 05:53:38 -07:00
7f4c34ff6a Oops, stop requiring a new password whenever AuthUser is changed
Ah right, I went and checked the Devise source code, and the default
implementation for `password_required?` is a bit trickier than I
expected:

```ruby
def password_required?
  !persisted? || !password.nil? || !password_confirmation.nil?
end
```

Looks like `super` does a good enough job here, though! (I'm actually
kinda surprised, I wasn't sure how Ruby's `super` rules worked, and
this isn't a subclass thing—or maybe it is, maybe the `devise` method
adds a mixin? Idk! But it does what I expect, so, great!)

So now, we require the password if 1) Devise doesn't see a UI reason
not to, *and* 2) the user isn't using OmniAuth (i.e. NeoPass).

This had caused a bug where it was impossible to use the Settings page
*without* changing your password! (The form says it's okay to leave it
blank, which stopped being true! But now it's fixed!)
2024-03-14 19:20:33 -07:00
3eeb5d1065 Actually create user from NeoPass authentication! <3 <3
Whew, exciting! Still done nothing against the live NeoPass server, but
we've got this fully working with the development server, it seems!
Wowie!!

This is all still hidden behind secret flags, so it's fine to deploy
live. (And it's not actually a problem if someone gets past to the
endpoints behind it, because we haven't actually set up real
credentials for our NeoPass client yet, so authentication will fail!)

Okay time to lie down lol.
2024-03-14 19:11:06 -07:00
f483722af4 NeoPass strategy interacts with dev NeoPass server, which is still WIP
In this change, we wire up a new NeoPass OAuth2 strategy for OmniAuth,
and hook up the "Log in with NeoPass" button to use it!

The authentication currently fails with `invalid_credentials`, and
shows the `owo` response we hardcoded into the NeoPass server's token
response. We need to finally follow up on the little `TODO` written in
there!
2024-03-14 16:13:31 -07:00
77057fe6a2 Add hidden "Log in with NeoPass" button, to placeholder login strategy
If you pass `?neopass=1` (or a secret value in production), you can see
the "Log in with NeoPass" button, which currently takes you to
OmniAuth's "developer" login page, where you can specify a name and
email and be redirected back. (All placeholder UI!)

We're gonna strip the whole developer strategy out pretty fast and
replace it with one that uses our NeoPass test server. This is just me
checking my understanding of the wiring!
2024-03-14 15:34:24 -07:00
08b1b9e83b Add OmniAuth plugin to AuthUser
This is setting us up for NeoPass, but first we're just gonna try stuff
with the "developer" strategy that's built in for testing, rather than
using the NeoPass dev server!
2024-03-14 15:06:13 -07:00
0e7bbd526f Clarify the error behavior on AuthUser syncing
I added bangs to signify they're mutative operations, but also the bang on `create!` helps ensure we'll bail if User creation fails for some reason.
2023-10-23 19:05:08 -07:00
82be3bf5f9 Enable password resets
Nice, just turning it on seemed to do all we need for now!

Fair questions to be asked about like, should you be able to look up by username instead of email? But like idk, this feels simpler *and* more solid, to give you feedback on if it's the right email.
2023-10-23 19:05:08 -07:00
33b2953949 Enable basic AuthUser tracking
Simply turning back on the module that tracks sign-ins and IP addresses.
2023-10-23 19:05:08 -07:00
e79428fa28 Add Remember Me to login
This requires a migration, our first migration against the openneo_id database from this app! Fun!
2023-10-23 19:05:08 -07:00
d65aafdd4c Signup and settings page for OpenNeo ID accounts
Hey nice!!

Note that I removed an account delete button from the settings page. You can still send a DELETE request to the right endpoint to do it, but it's not gonna delete all the associated records, and I wanna think a bit about how to handle that better before exposing that button.
2023-10-23 19:05:07 -07:00
eee097a9f8 Sync AuthUser and User names
Callbacks are handy for this!
2023-10-23 19:05:07 -07:00
75185de957 Create a User when we create an AuthUser
We also update seeds.rb to be up to date! This should make it possible to log in as test/test123 from a fresh database.
2023-10-23 19:05:07 -07:00
83f80facda Can log into OpenNeo ID accounts directly!
A lot of rough edges here (e.g. no styles on the flash messages), but it's working and that's good!!

I tested this by temporarily switching to the production database and logging in as matchu!

Still missing a lot of big features too, like registration, password resets, settings page, etc.
2023-10-23 19:05:07 -07:00
1d5af835a5 Add AuthUser model, connecting to openneo_id db
No user-facing functionality here yet, just configuring the database connection to work with openneo_id records.

This is a first step in integrating Devise stuff into this app instead of connecting with a weird second app.

My basic testing for this was to temporarily connect to production `openneo_id`, and see `AuthUser.first` correctly return a user!
2023-10-23 19:05:07 -07:00