For Alt Style outfits, it's useful to call special attention to the Alt
Style feature as the likely cause of incompatibilities.
(Incompatibilities previously were most often caused by choosing a
species-specific item, then switching to another species. We generally
make it hard to enter this state, by hiding incompatible items during
search.)
Now that the pose picker button can have text content too, things were
getting pretty cramped horizontally on smaller screens! Now we use the
`sm` size when it's small-time.
I'm not planning to port full Alt Style support over to the 2020
frontend, I really am winding that down, but adding a couple lil API
parameters are *by far* the easiest way to get Alt Styles working in
the main app because of how it calls the 2020 API. So here we are, just
using new parameters for DTI 2020 that I'm gonna deploy to impress-2020
first!
Specifically, I was looking at the new "Stormy Cloud Kacheek" items,
and was surprised to find that, in the outfit editor, they all get
grouped under "Markings" (and therefore the UI treats them as
mutually-exclusive via hidden radio button and only bolds one at a
time), but they aren't actually conflicting because they occupy
different zones named "Markings".
In this change, we make the zone groups actually just be *by zone*
rather than jumbling all of the zones with the same label together; but
in most cases, we still keep the same simplified display. In the case
of the "Stormy Cloud Kacheek" items though, we now get a few groups:
`Glasses`, `Markings (#6)`, and `Markings (#16)`. Glasses is chosen
by coincidence because it's the first zone label for that item
alphabetically (even though that item also occupies a third "Markings"
zone), and then the other two know to disambiguate from each other.
There's an opportunity here to cheat things further, like to
*intentionally* select items like "Glasses" that are less ambiguous
when possible. I'm not aware of enough other cases like this for that
to really matter, though, so I'm just leaving it as-is!
I tested this a *bit* on other outfits, and everything looked fine at
a glance, so I'm just moving forward—but I'll make an announcement to
ask people to help take a look!
This wasn't causing big problems because we made resilient little
choices in a lot of little places… but it's confusing as a potential
state, and the Styles chooser wasn't selecting the "Default" option
after you switch—which is what tipped us off!
Yay it works(*)! But two major missing pieces:
- Outfit saving doesn't persist it at all
- Item compatibility is unaffected: items will still appear in search
and in the preview, even when they don't fit anymore.
To help with space, I'm just showing the word "Nostalgic" (or "???" if
it's from a series we don't recognize, this is hardcoded by ID), and
trusting that from context it will be obvious that it's the "Nostalgic
Faerie" case or whatever. (Moreover, in both the button and the select
we're omitting the species name, by similar reasoning!)
Note that this _still_ doesn't actually apply the style to the outfit
whatsoever; this is all just local state as we're continuing to play
with UI concepts. Actually applying it is probably next though! (Though
there's a couple more UI things I want to do, like some affordances to
clarify that a Style is applied and that Expression changes won't work.)
Oh right, React Query's API is slightly different, fixed! (Previously,
this would cause the PosePicker to show before all the data was ready,
so alt styles would sometimes pop in after the popover was already
open.)
On small screens, the PosePicker opens down, and we put the tabs on the
top, to be near the button.
On large screens, the PosePicker opens up, and we put the tabs on the
bottom, to be near the button.
Previously, we always set `placement="bottom-end"`, which on small
screens behaved as written, and on large screens there would not be
space to open downward so it would open upward instead.
Now, we set the placement explicitly based on a media breakpoint, and
we change the `flexDirection` of the tabs container on the same media
breakpoint.
I'm playing with using text to call more attention to this button, but
I'm not altogether pleased with the design yet. I'll leave it there for
me and Support users, but hide it for most people until we've got a
more complete concept.
That way, I can stop being on a branch and be working on main, and
deploy stuff to preview live, without having to share it with everyone
just yet! (This was the motivation for finally adding Support tooling
to main DTI lol!)
A little architecture trick here! DTI 2020 authorizes support staff
requests by means of a secret token, instead of user account stuff. And
our support tools still all call DTI 2020 APIs.
So here, we bridge the gap: we copy DTI 2020's support secret to this
app's environment variables (I needed to update
`deploy/files/production.env` and run `bin/deploy:setup` for this!),
then users with the new `support_secret` flag have it added to their
HTML documents in the meta tags. Then, the JS reads the meta tag.
I also fixed an issue in the `deploy/setup.yml` playbook, where I had
temporarily commented some stuff out to skip steps one time, and forgot
to uncomment them after oops lol!
To activate this, I created a `.env.development` file in my project
root, with the following content:
```env
IMPRESS_2020_ORIGIN=http://localhost:4000
```
Then, I started impress-2020 with `yarn dev --port=4000`.
Now, the app loads from there, hooray!! It even fixes that obnoxious
pet state ID bug that happens when you run against the production db lol
I made two mistakes here! One is that you need to round up subpixel
line heights, and the other is that `clientHeight` is what I want, I
shouldn't include the margin!
I guess I deleted this a while ago without really noticing… I think I'd
at some point like to replace this with like, the DTI 2020 improved
table layout thing, but I figured this would be pretty quick to throw
in and make the page not feel like a pain to use lmao
Just moving more stuff over! I modernized Item's `as_json` method while
I was here. (Note that I removed the NC/own/want fields, because I
think the only other place this method is still called from is the
quick-add feature on the closet lists page, and I think it doesn't use
these fields to do anything: updating the page is basically a full-page
reload, done sneakily.)
Ok progress! We've moved the info about what bodies this fits, and
what zones it occupies, into a Rails API endpoint that we now load at
the same time as the other data!
We'll keep moving more over, too!
Really don't know why this wasn't a problem with Apollo (or was it??),
but yeah, don't save when there's a save error!! Then we reset the
mutation state when the outfit state changes.
It's weird to be reading this code and be like. was this not always an
issue? Maybe something in Apollo prevented this? Did we use optimistic
UI or something? Idk?
There's still an issue with it infinitely retrying in an error state
though.
In the impress-2020 app, we use this to prepopulate certain GraphQL
data into the Apollo cache when SSR'ing a page. We don't do that here,
so, goodbye!
The wardrobe-2020 app had a cute drawer that embeds the item page, but
honestly I don't think it was that valuable, and especially not when it
means we have to basically maintain two item pages lol. Let's decrease
the surface area!
Ok cool, I have just not been running any of this since moving out of
impress-2020, but now that we're doing serious JS work in here it's time
to turn it back on!!
1. Install eslint and the plugins we use
2. Set up a `yarn lint` command
3. Set up a git hook via husky to lint on pre-commit
4. Fix/disable all the lint errors!
Rather than letting the fact that the server API models outfits a bit
differently (underscore keys, integer IDs for things), I'd rather
convert it to the familiar field names and expected types!
This came in a few parts!
1. Add meta tags to let us know we're logged in.
2. Install React Query, which has the data-loading sensibilities I like
about Apollo without the GraphQL that has honestly been a drag.
3. Replace the outfit-loading and outfit-saving calls with API calls to
the main app.
4. Update the main app's API calls to use our more flexible data
constructs like "pose".
Would've loved to do this more incrementally, but it's hard to! You
can't split out outfit-loading and outfit-saving, or auth from any of
that, or the state gets all out-of-sorts.
Still, this is a good nugget we've pulled out all-in-all, and one that
people have been asking for! Can maybe look to logged-in item search
soon too, for own/want data?
Moreover, this code is in a bit of a flimsy state anyway: it'll kinda
work if you're logged in at impress-2020.openneo.net, but that wasn't
intentionally engineered, and I'm not sure exactly what circumstances
cause those cookies to send vs not send?
My intent is to clean up to replace all this with login code that
references the main app instead… this'll require swapping out some
endpoints to refer to what the main app has, but I'm hoping that's not
so tricky to do, since the main app does offer basically all of this
functionality already anyway. (That's not to say it's simple, but I
think it's a migration in the right direction!)
Ohh I see, I made a mistake converting this from Next.js routing. It's
not that we had a URL search parameter named `outfitId`; it's that if
you were coming from the `/outfits/:outfitId` route, it would use that!
I still haven't gotten the rest of the site to point that route to this
page, but I'll do that in a later change.
Notable things:
- We used to have the parameters in the hash (`#`) part of the URL.
- We used to use the key `outfit=123` instead of `outfitId=123`.
In this change, we add backwards-compatibility for these things, while
still keeping the latest behavior too, with no change to the URLs we
generate!
Looks like the version of Prettier I just installed is v3, whereas our
last run in the impress-2020 repo was with v2. I don't think we had any
special config in that project, I think these are just changes to
Prettier's defaults, and I'm comfortable accepting them! (Mostly seems
like a lot of trailing commas.)
This is an important workflow for people doing art stuff, I'm told! They used to use the Classic DTI broken image UI for this, but now that that's uhh Fully Gone, let's add this more explicitly!
Ah right, the CSS reset only applies in the ScopedCSSReset container, which doesn't work for elements portaled out with the <Portal> component (which a LOT of Chakra components use for things like tooltips etc).
Here, we take advantage of <Portal> having a hardcoded classname .chakra-portal, and applying it to them too!
Eyyy tasty! There were some issues with conflicting styles with the main app, but I think we got it!
Scoping Chakra's CSS reset was a big deal to not accidentally overwrite the app's own styles lol, and we had to solve a specificity problem for that, thanks Aria for the :where tip!! <3
We never had a specific reason why we didn't use the router for this I don't think? Not that I wrote down anyway. Let's just switch it over and see what happens!
I mainly did this as a misdiagnosis of the page reload problem fixed in c162864, but it seems like a good idea to try out anyway!
This I think is why the page was reloading when you try to item search? The failed import was triggering our "hey maybe this is an old module URL that got deleted" code?
We add jsbuilding-rails to get esbuild running in the app, and then we copy-paste the files we need from impress-2020 into here!
I stopped at the point where it was building successfully, but it's not running correctly: it's not sure about `process.env` in `next`, and I think the right next step is to delete the NextJS deps altogether and use React Router instead.
